diff --git a/README b/README
index 800dceb..afcfca1 100644
--- a/README
+++ b/README
@@ -144,6 +144,7 @@ to be processed. All other arguments are interpreted as a COMMAND, which may be
test - run the package's test suite, if one exists
install - install into a DESTDIR, and run post-installation steps
package - create binary and source packages
+ upload - upload finished packages to cygwin.com
finish - delete the working directory
all - run all of the above, including finish
almostall - run all of the above, except for finish
@@ -197,6 +198,7 @@ addition to the packages own dependencies:
gawk
grep
gzip
+ lftp
libtool
lndir
make
diff --git a/bin/cygport.in b/bin/cygport.in
index 0b26444..e14b22a 100755
--- a/bin/cygport.in
+++ b/bin/cygport.in
@@ -99,6 +99,7 @@ source ${_privlibdir}/syntax.cygpart
# * Installing
# * Postinstall
# * Packaging
+# * Uploading
# * Cygclasses
#****
@@ -108,8 +109,8 @@ source ${_privlibdir}/syntax.cygpart
# REQUIRES
# The following packages are required to build packages with cygport:
# autoconf, automake, bash, binutils, bzip2, coreutils, diffstat, diffutils,
-# dos2unix, file, gawk, grep, gzip, libtool, lndir, make, patch, rsync, sed,
-# tar, unzip, util-linux, wget, which, xz.
+# dos2unix, file, gawk, grep, gzip, lftp, libtool, lndir, make, patch, rsync,
+# sed, tar, unzip, util-linux, wget, which, xz.
# Other software packages are required by some Cygclasses, as indicated within.
#****
@@ -293,6 +294,27 @@ unset conf;
# section.
#****
+#****** Cygport/Uploading
+# INTRODUCTION
+# Once your binary and source packages are built, in order to distribute them
+# to users, you need to upload them to the Cygwin package archive. Before
+# you can upload packages, you'll need to do the following things:
+# * Request upload privileges, and provide your ssh public key. The
+# |html Uploading Packages
+# page tells how to do that, and how to be notified in case of problems with
+# your uploads.
+# * Be listed on the
+# |html Cygwin package maintainers list
+# as the maintainer of your packages. Ask on the cygwin-apps mailing list if
+# you need help getting listed.
+#
+# Once those things are done, running
+# |html cygport upload (or cygport up for short)
+# will upload your finished packages to the package archive on cygwin.com.
+# From there, if everything goes well, the new files should appear on your
+# local Cygwin mirror within about 12 hours.
+#****
+
#****** Cygport/Cygclasses
# DESCRIPTION
# Cygclasses serve as cygport's standard library, allowing cygport to support
@@ -518,6 +540,10 @@ source ${_privlibdir}/pkg_info.cygpart
source ${_privlibdir}/pkg_pkg.cygpart
###
+### __pkg_upload
+source ${_privlibdir}/pkg_upload.cygpart
+###
+
### __finish
source ${_privlibdir}/pkg_cleanup.cygpart
###
@@ -737,6 +763,7 @@ declare -r compilelog="${logdir}/${PF}-compile.log";
declare -r checklog="${logdir}/${PF}-check.log";
declare -r installlog="${logdir}/${PF}-install.log";
declare -r pkglog="${logdir}/${PF}-pkg.log";
+declare -r uploadlog="${logdir}/${PF}-upload.log";
if ! defined SRC_URI
then
@@ -860,6 +887,12 @@ do
__pkg_diff;
_status=$?;
;;
+ upload|up)
+ __stage Uploading;
+ __log_init ${uploadlog};
+ (__pkg_upload) 2>&1 | tee -a ${uploadlog};
+ _status=$?;
+ ;;
clean|finish)
__finish;
_status=$?;
diff --git a/cygport.spec b/cygport.spec
index d0dcbf7..7a81b4b 100644
--- a/cygport.spec
+++ b/cygport.spec
@@ -28,6 +28,7 @@ Requires: file
Requires: gawk
Requires: grep
Requires: imake
+Requires: lftp
Requires: make
Requires: patch
Requires: rsync
diff --git a/data/cygport-bash-completion b/data/cygport-bash-completion
index 639f873..18a5adf 100644
--- a/data/cygport-bash-completion
+++ b/data/cygport-bash-completion
@@ -11,7 +11,7 @@ _cygport()
prep unpack oldpatch compile build make \
check test inst install list dep depends \
info package pkg diff mkdiff mkpatch clean finish \
- almostall all help version homepage website'
+ upload up almostall all help version homepage website'
if [[ $COMP_CWORD -eq 1 ]] ; then
# first arg: source file completion
diff --git a/data/cygport.conf b/data/cygport.conf
index 87a5312..be859c8 100644
--- a/data/cygport.conf
+++ b/data/cygport.conf
@@ -66,6 +66,12 @@
#****
#PAGER=
+#****v* Configuration/SSH_KEY
+# DESCRIPTION
+# Path to the SSH private key corresponding to the public key registered
+# for uploading on sourceware.
+#****
+#SSH_KEY=~/.ssh/id_rsa
# You can select your own mirrors to use instead of the generic list.
# See the documentation for mirror list locations and default mirrors.
diff --git a/data/sample.cygport b/data/sample.cygport
index 9f54858..f89cb2e 100644
--- a/data/sample.cygport
+++ b/data/sample.cygport
@@ -16,7 +16,7 @@ ARCH=noarch
DEPEND="groff help2man robodoc"
# runtime deps to go in setup.hint, and note the escaped newline
REQUIRES="autoconf automake binutils bzip2 coreutils diffstat diffutils \
-dos2unix findutils file gawk gcc-core gcc-g++ grep gzip libtool lndir \
+dos2unix findutils file gawk gcc-core gcc-g++ grep gzip lftp libtool lndir \
make patch rsync sed tar texinfo unzip util-linux wget which xz"
# We use the standard src_compile and src_test.
diff --git a/lib/Makefile.am b/lib/Makefile.am
index 0c9a862..5e1e965 100644
--- a/lib/Makefile.am
+++ b/lib/Makefile.am
@@ -8,6 +8,7 @@ cygpart_DATA = \
lib/pkg_cleanup.cygpart \
lib/pkg_info.cygpart \
lib/pkg_pkg.cygpart \
+ lib/pkg_upload.cygpart \
lib/src_compile.cygpart \
lib/src_fetch.cygpart \
lib/src_install.cygpart \
diff --git a/lib/help.cygpart b/lib/help.cygpart
index 4e82399..0fd9e61 100644
--- a/lib/help.cygpart
+++ b/lib/help.cygpart
@@ -46,6 +46,7 @@ __show_help() {
test run the package's test suite, if one exists
install install into a DESTDIR, and run post-installation steps
package create binary and source packages
+ upload upload finished packages to cygwin.com
finish delete the working directory
all run all of the above, excluding finish
diff --git a/lib/pkg_upload.cygpart b/lib/pkg_upload.cygpart
new file mode 100644
index 0000000..f505b9e
--- /dev/null
+++ b/lib/pkg_upload.cygpart
@@ -0,0 +1,92 @@
+################################################################################
+#
+# pkg_upload.cygpart - cygport package uploading functions
+#
+# Copyright (C) 2014 Andrew Schulman, Yaakov Selkowitz
+# Provided by the Cygwin Ports project
+#
+# cygport is free software: you can redistribute it and/or modify
+# it under the terms of the GNU General Public License as published by
+# the Free Software Foundation, either version 3 of the License, or
+# (at your option) any later version.
+#
+# cygport is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with cygport. If not, see .
+#
+################################################################################
+
+__pkg_upload() {
+ local d;
+ local f;
+ local -i n=0;
+ local -i missing=0;
+ local -a dist_files=(${PN}/${PN}-${PV}-${PR}-src.tar.xz ${PN}/setup.hint)
+ local -a archdir;
+
+ cd "${distdir}"
+
+ # Check that binary and source package files exist
+ while (( n < pkg_count ))
+ do
+ case ${pkg_name[${n}]} in
+ ${PN}) distsubdir= ;;
+ *) distsubdir=${pkg_name[${n}]} ;;
+ esac
+
+ dist_files+=(${PN}/${distsubdir}/${pkg_name[${n}]}-${PVR}.tar.xz ${PN}/${distsubdir}/setup.hint)
+
+ n+=1;
+ done
+
+ for f in ${dist_files[*]}
+ do
+ [ -f ${f} ] || missing+=1;
+ done
+
+ if (( missing > 0 ))
+ then
+ error "Package staging is incomplete. Run \"cygport ${cygportfile} package\" to stage packages for upload."
+ fi
+
+ # Upload
+
+ case ${ARCH} in
+ i686) archdir=(x86) ;;
+ x86_64) archdir=(x86_64) ;;
+ noarch) archdir=(x86 x86_64) ;;
+ esac
+
+ __step "Uploading..."
+
+ {
+ echo "set cmd:fail-exit on"
+ echo "set cmd:interactive on"
+ echo "set net:max-retries 1"
+
+ if test -n "$SSH_KEY"
+ then
+ echo "set sftp:connect-program ssh -a -x -i '${SSH_KEY}'"
+ fi
+
+ echo "open sftp://cygwin:@cygwin.com"
+
+ for d in ${archdir[*]}
+ do
+ echo "cd /${d}/release"
+# echo "rm -f !ready || echo -n"
+ echo "mirror -v -eR ${PN}"
+ echo "put -O ${PN} /dev/null -o !ready"
+ done
+
+ } | lftp -f /dev/stdin || error "Upload failed"
+
+ __step "Upload complete."
+}
+
+# protect functions
+readonly -f __pkg_upload