Patch file for building perl5.003_94 with dynamic extension libs (dlls) using
the cygnus gnuwin32 package on windows 95 or windows NT.

The following assumes you have the gnuwin32 (version b17.1) package installed 
and configured on your system. See http://www.cygnus.com/misc/gnu-win32/ for 
details on the gnuwin32 package.

1) Obtain perl5.003_94 (from www.perl.com or CPAN) and extract 
     to a directory on your system.

2) cd to the path where perl5.003_94 is installed. e.g, if you
   installed to /perl5.003_94, then cd to /perl5.003_94.

3) Apply this patch:
patch -p1 < dllpatch 

  Note: If you have problems with the patch that comes with
     the gnuwin32 package, (I have had problems getting it to apply 
     multiple patches in a single file) try the patch located
     at http://www.simtel.net/pub/simtelnet/win95/prog/gpatch2b.zip.
     Also, the files pp_sys.c and perl.h that the patch modifies must
     be in unix format. If your extraction utility (like winzip) converts
     to dos format, change the format of these files back before applying
     the patch.
5) Modify the ld2 script 
   Change the PERLPATH variable to the location you extracted perl.
    for example, if you extracted perl to /perl5.003_94, change so
    the line looks like:
PERLPATH=/perl5.003_94

4) Copy the two scripts ld2, and gcc2 to a directory in your PATH 
   environment variable. For example, copy to /bin, assuming /bin is
   in your PATH. (These two scripts ld2 and gcc2 are 'wrapper' scripts
   that encapsulate the multiple-pass dll building steps used by gnuwin32 ld/gcc.)

5) Run the perl Configuration script as stated in the perl README file;
	e.g.
	sh Configure
   select gnuwin32 at this prompt:
   First time through, eh?  I have some defaults handy for the following systems:
   .
   .
   .
   Which of these apply, if any?

   The defaults should be OK for everything else, except for the specific pathnames for 
   the gnuwin32 libs, include files, installation dirs, etc on your system. 

   Note:
   On windows 95, the configuration script only stops every other time
    for responses from the command line. In this case you can manually edit
    the gnuwin32.sh hint file for your paths, copy hints/gnuwin32.sh to config.sh,
    and run Configure non-interactively using sh Configure -d. 

6) Do a make, as stated in the perl README file

7) Do a make test. Some test will fail, but you should get around a 
	83% OK result. (Most failures seem to be due to unix'ism that
        don't apply for win32.)

8) Do a make install. This will fail about 1/2 of the way thru. It appears
	that perl can't find itself when it forks because it cd's to another 
        directory during the install process. You get around this by invoking
        the install script using a full pathname for perl. For example, if
	perl is extracted to perl5.003_94, do a 
	'/perl5.003_94/perl installperl'. This should complete the install
        process.




diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/ext/DynaLoader/dl_gnuwin32.xs perl5.003_94/ext/DynaLoader/dl_gnuwin32.xs
*** //e/temp2/perl5.003_94/ext/DynaLoader/dl_gnuwin32.xs	Tue Apr 01 16:02:45 1997
--- perl5.003_94/ext/DynaLoader/dl_gnuwin32.xs	Thu Mar 27 15:08:35 1997
***************
*** 0 ****
--- 1,152 ----
+ /* dl_gnuwin32.xs
+  * 
+  * Platform:	Win32 (Windows NT/Windows 95)
+  * Author:	Wei-Yuen Tan (wyt@hip.com)
+  * Created:	A warm day in June, 1995
+  *
+  * Modified:
+  *    August 23rd 1995 - rewritten after losing everything when I
+  *                       wiped off my NT partition (eek!)
+  */
+ /* Modified from the original dl_win32.xs to work with gnuwin32
+    -John Cerney 3/26/97
+ */
+ /* Porting notes:
+ 
+ I merely took Paul's dl_dlopen.xs, took out extraneous stuff and
+ replaced the appropriate SunOS calls with the corresponding Win32
+ calls.
+ 
+ */
+ 
+ #define WIN32_LEAN_AND_MEAN
+ // Defines from windows needed for this function only. Can't include full
+ //  gnuwin2 windows headers because of problems with CONTEXT redefinition
+ //  Removed logic to tell not dynamically load static modules. It is assumed that all
+ //   modules are dynamically built. This should be similar to the behavoir on sunOS.
+ //   Leaving in the logic would have required changes to the standard perlmain.c code
+ //
+ // // Includes call a dll function to initialize it's impure_ptr.
+ #include <stdio.h>
+ void (*impure_setupptr)(struct _reent *);  // pointer to the impure_setup routine
+ 
+ //#include <windows.h>
+ #define LOAD_WITH_ALTERED_SEARCH_PATH	(8)
+ typedef void *HANDLE;
+ typedef HANDLE HINSTANCE;
+ #define STDCALL     __attribute__ ((stdcall))
+ typedef int STDCALL (*FARPROC)();
+ 
+ HINSTANCE
+ STDCALL
+ LoadLibraryExA(
+ 	       char* lpLibFileName,
+ 	       HANDLE hFile,
+ 	       unsigned int dwFlags
+ 	       );
+ unsigned int
+ STDCALL
+ GetLastError(
+ 	     void
+ 	     );
+ FARPROC
+ STDCALL
+ GetProcAddress(
+ 	       HINSTANCE hModule,
+ 	       char* lpProcName
+ 	       );
+ 
+ #include <string.h>
+ 
+ #include "EXTERN.h"
+ #include "perl.h"
+ #include "XSUB.h"
+ 
+ #include "dlutils.c"	/* SaveError() etc	*/
+ 
+ static void
+ dl_private_init()
+ {
+     (void)dl_generic_private_init();
+ }
+ 
+ 
+ MODULE = DynaLoader	PACKAGE = DynaLoader
+ 
+ BOOT:
+     (void)dl_private_init();
+ 
+ void *
+ dl_load_file(filename,flags=0)
+     char *		filename
+     int			flags
+     PREINIT:
+     CODE:
+     DLDEBUG(1,fprintf(stderr,"dl_load_file(%s):\n", filename));
+ 
+     RETVAL = (void*) LoadLibraryExA(filename, NULL, LOAD_WITH_ALTERED_SEARCH_PATH ) ;
+ 
+     DLDEBUG(2,fprintf(stderr," libref=%x\n", RETVAL));
+     ST(0) = sv_newmortal() ;
+     if (RETVAL == NULL){
+ 	SaveError("%d",GetLastError()) ;
+     }
+     else{
+ 	// setup the dll's impure_ptr:
+ 	impure_setupptr = GetProcAddress(RETVAL, "impure_setup");
+ 	if( impure_setupptr == NULL){
+ 		printf("Gnuwin32 Dynaloader Error, Could not load impure_setup symbol\n");
+ 		RETVAL = NULL;		
+ 	}
+ 	else{
+ 		// setup the DLLs impure_ptr:
+ 		(*impure_setupptr)(_impure_ptr);
+ 		sv_setiv( ST(0), (IV)RETVAL);
+ 	}
+    }
+ 	
+ 
+ 
+ void *
+ dl_find_symbol(libhandle, symbolname)
+     void *	libhandle
+     char *	symbolname
+     CODE:
+     DLDEBUG(2,fprintf(stderr,"dl_find_symbol(handle=%x, symbol=%s)\n",
+ 	libhandle, symbolname));
+     RETVAL = (void*) GetProcAddress((HINSTANCE) libhandle, symbolname);
+     DLDEBUG(2,fprintf(stderr,"  symbolref = %x\n", RETVAL));
+     ST(0) = sv_newmortal() ;
+     if (RETVAL == NULL)
+ 	SaveError("%d",GetLastError()) ;
+     else
+ 	sv_setiv( ST(0), (IV)RETVAL);
+ 
+ 
+ void
+ dl_undef_symbols()
+     PPCODE:
+ 
+ 
+ 
+ # These functions should not need changing on any platform:
+ 
+ void
+ dl_install_xsub(perl_name, symref, filename="$Package")
+     char *		perl_name
+     void *		symref 
+     char *		filename
+     CODE:
+     DLDEBUG(2,fprintf(stderr,"dl_install_xsub(name=%s, symref=%x)\n",
+ 		perl_name, symref));
+     ST(0)=sv_2mortal(newRV((SV*)newXS(perl_name, (void(*)())symref, filename)));
+ 
+ 
+ char *
+ dl_error()
+     CODE:
+     RETVAL = LastError ;
+     OUTPUT:
+     RETVAL
+ 
+ # end.
diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/extLibInc.h perl5.003_94/extLibInc.h
*** //e/temp2/perl5.003_94/extLibInc.h	Tue Apr 01 16:02:13 1997
--- perl5.003_94/extLibInc.h	Tue Apr 01 13:18:23 1997
***************
*** 0 ****
--- 1,355 ----
+ /* include file for building of extension libs using gnuwin32.
+    This file is included by the extension dlls when they are built.
+    Global vars defined in perl exe are referenced by the extension module
+    dll by using __imp_varName, where varName is the name of the global 
+    variable in perl.exe. Gnuwin32 has no equivalent to MSVC's
+    __declspec(dllimport) keyword to define a imported global, so we have
+    to use this approach to access globals exported by perl.exe
+     -jc 4/1/97
+ */
+ 
+ #define  impure_setupptr   (*__imp_impure_setupptr)
+ #define  Perl_reall_srchlen   (*__imp_Perl_reall_srchlen)
+ #define  Perl_yychar   (*__imp_Perl_yychar)
+ #define  Perl_yycheck   (*__imp_Perl_yycheck)
+ #define  Perl_yydebug   (*__imp_Perl_yydebug)
+ #define  Perl_yydefred   (*__imp_Perl_yydefred)
+ #define  Perl_yydgoto   (*__imp_Perl_yydgoto)
+ #define  Perl_yyerrflag   (*__imp_Perl_yyerrflag)
+ #define  Perl_yygindex   (*__imp_Perl_yygindex)
+ #define  Perl_yylen   (*__imp_Perl_yylen)
+ #define  Perl_yylhs   (*__imp_Perl_yylhs)
+ #define  Perl_yylval   (*__imp_Perl_yylval)
+ #define  Perl_yynerrs   (*__imp_Perl_yynerrs)
+ #define  Perl_yyrindex   (*__imp_Perl_yyrindex)
+ #define  Perl_yysindex   (*__imp_Perl_yysindex)
+ #define  Perl_yytable   (*__imp_Perl_yytable)
+ #define  Perl_yyval   (*__imp_Perl_yyval)
+ #define  Perl_regarglen   (*__imp_Perl_regarglen)
+ #define  Perl_regdummy   (*__imp_Perl_regdummy)
+ #define  Perl_regkind   (*__imp_Perl_regkind)
+ #define  Perl_simple   (*__imp_Perl_simple)
+ #define  Perl_varies   (*__imp_Perl_varies)
+ #define  Perl_watchaddr   (*__imp_Perl_watchaddr)
+ #define  Perl_watchok   (*__imp_Perl_watchok)
+ #define  Argv   (*__imp_Argv)
+ #define  Cmd   (*__imp_Cmd)
+ #define  DBgv   (*__imp_DBgv)
+ #define  DBline   (*__imp_DBline)
+ #define  DBsignal   (*__imp_DBsignal)
+ #define  DBsingle   (*__imp_DBsingle)
+ #define  DBsub   (*__imp_DBsub)
+ #define  DBtrace   (*__imp_DBtrace)
+ #define  Error   (*__imp_Error)
+ #define  Perl_AMG_names   (*__imp_Perl_AMG_names)
+ #define  Perl_No   (*__imp_Perl_No)
+ #define  Perl_Sv   (*__imp_Perl_Sv)
+ #define  Perl_Xpv   (*__imp_Perl_Xpv)
+ #define  Perl_Yes   (*__imp_Perl_Yes)
+ #define  Perl_amagic_generation   (*__imp_Perl_amagic_generation)
+ #define  Perl_an   (*__imp_Perl_an)
+ #define  Perl_buf   (*__imp_Perl_buf)
+ #define  Perl_bufend   (*__imp_Perl_bufend)
+ #define  Perl_bufptr   (*__imp_Perl_bufptr)
+ #define  Perl_check   (*__imp_Perl_check)
+ #define  Perl_collation_ix   (*__imp_Perl_collation_ix)
+ #define  Perl_collation_name   (*__imp_Perl_collation_name)
+ #define  Perl_collation_standard   (*__imp_Perl_collation_standard)
+ #define  Perl_collxfrm_base   (*__imp_Perl_collxfrm_base)
+ #define  Perl_collxfrm_mult   (*__imp_Perl_collxfrm_mult)
+ #define  Perl_compcv   (*__imp_Perl_compcv)
+ #define  Perl_compiling   (*__imp_Perl_compiling)
+ #define  Perl_comppad   (*__imp_Perl_comppad)
+ #define  Perl_comppad_name   (*__imp_Perl_comppad_name)
+ #define  Perl_comppad_name_fill   (*__imp_Perl_comppad_name_fill)
+ #define  Perl_cop_seqmax   (*__imp_Perl_cop_seqmax)
+ #define  Perl_curcop   (*__imp_Perl_curcop)
+ #define  Perl_curcopdb   (*__imp_Perl_curcopdb)
+ #define  Perl_curinterp   (*__imp_Perl_curinterp)
+ #define  Perl_curpad   (*__imp_Perl_curpad)
+ #define  Perl_dc   (*__imp_Perl_dc)
+ #define  Perl_di   (*__imp_Perl_di)
+ #define  Perl_ds   (*__imp_Perl_ds)
+ #define  Perl_egid   (*__imp_Perl_egid)
+ #define  Perl_envgv   (*__imp_Perl_envgv)
+ #define  Perl_error_count   (*__imp_Perl_error_count)
+ #define  Perl_euid   (*__imp_Perl_euid)
+ #define  Perl_evalseq   (*__imp_Perl_evalseq)
+ #define  Perl_expect   (*__imp_Perl_expect)
+ #define  Perl_fold_locale   (*__imp_Perl_fold_locale)
+ #define  Perl_gid   (*__imp_Perl_gid)
+ #define  Perl_he_root   (*__imp_Perl_he_root)
+ #define  Perl_hexdigit   (*__imp_Perl_hexdigit)
+ #define  Perl_hints   (*__imp_Perl_hints)
+ #define  Perl_in_my   (*__imp_Perl_in_my)
+ #define  Perl_last_lop   (*__imp_Perl_last_lop)
+ #define  Perl_last_lop_op   (*__imp_Perl_last_lop_op)
+ #define  Perl_last_uni   (*__imp_Perl_last_uni)
+ #define  Perl_lex_brackets   (*__imp_Perl_lex_brackets)
+ #define  Perl_lex_brackstack   (*__imp_Perl_lex_brackstack)
+ #define  Perl_lex_casemods   (*__imp_Perl_lex_casemods)
+ #define  Perl_lex_casestack   (*__imp_Perl_lex_casestack)
+ #define  Perl_lex_defer   (*__imp_Perl_lex_defer)
+ #define  Perl_lex_dojoin   (*__imp_Perl_lex_dojoin)
+ #define  Perl_lex_expect   (*__imp_Perl_lex_expect)
+ #define  Perl_lex_fakebrack   (*__imp_Perl_lex_fakebrack)
+ #define  Perl_lex_formbrack   (*__imp_Perl_lex_formbrack)
+ #define  Perl_lex_inpat   (*__imp_Perl_lex_inpat)
+ #define  Perl_lex_inwhat   (*__imp_Perl_lex_inwhat)
+ #define  Perl_lex_op   (*__imp_Perl_lex_op)
+ #define  Perl_lex_repl   (*__imp_Perl_lex_repl)
+ #define  Perl_lex_starts   (*__imp_Perl_lex_starts)
+ #define  Perl_lex_state   (*__imp_Perl_lex_state)
+ #define  Perl_lex_stuff   (*__imp_Perl_lex_stuff)
+ #define  Perl_linestr   (*__imp_Perl_linestr)
+ #define  Perl_markstack   (*__imp_Perl_markstack)
+ #define  Perl_markstack_max   (*__imp_Perl_markstack_max)
+ #define  Perl_markstack_ptr   (*__imp_Perl_markstack_ptr)
+ #define  Perl_max_intro_pending   (*__imp_Perl_max_intro_pending)
+ #define  Perl_maxo   (*__imp_Perl_maxo)
+ #define  Perl_min_intro_pending   (*__imp_Perl_min_intro_pending)
+ #define  Perl_multi_close   (*__imp_Perl_multi_close)
+ #define  Perl_multi_end   (*__imp_Perl_multi_end)
+ #define  Perl_multi_open   (*__imp_Perl_multi_open)
+ #define  Perl_multi_start   (*__imp_Perl_multi_start)
+ #define  Perl_na   (*__imp_Perl_na)
+ #define  Perl_nexttoke   (*__imp_Perl_nexttoke)
+ #define  Perl_nexttype   (*__imp_Perl_nexttype)
+ #define  Perl_nextval   (*__imp_Perl_nextval)
+ #define  Perl_nomemok   (*__imp_Perl_nomemok)
+ #define  Perl_numeric_local   (*__imp_Perl_numeric_local)
+ #define  Perl_numeric_name   (*__imp_Perl_numeric_name)
+ #define  Perl_numeric_standard   (*__imp_Perl_numeric_standard)
+ #define  Perl_oldbufptr   (*__imp_Perl_oldbufptr)
+ #define  Perl_oldoldbufptr   (*__imp_Perl_oldoldbufptr)
+ #define  Perl_op   (*__imp_Perl_op)
+ #define  Perl_op_desc   (*__imp_Perl_op_desc)
+ #define  Perl_op_name   (*__imp_Perl_op_name)
+ #define  Perl_op_seqmax   (*__imp_Perl_op_seqmax)
+ #define  Perl_opargs   (*__imp_Perl_opargs)
+ #define  Perl_origalen   (*__imp_Perl_origalen)
+ #define  Perl_origenviron   (*__imp_Perl_origenviron)
+ #define  Perl_osname   (*__imp_Perl_osname)
+ #define  Perl_padix   (*__imp_Perl_padix)
+ #define  Perl_patleave   (*__imp_Perl_patleave)
+ #define  Perl_pidstatus   (*__imp_Perl_pidstatus)
+ #define  Perl_ppaddr   (*__imp_Perl_ppaddr)
+ #define  Perl_profiledata   (*__imp_Perl_profiledata)
+ #define  Perl_psig_name   (*__imp_Perl_psig_name)
+ #define  Perl_psig_ptr   (*__imp_Perl_psig_ptr)
+ #define  Perl_regbol   (*__imp_Perl_regbol)
+ #define  Perl_regcode   (*__imp_Perl_regcode)
+ #define  Perl_regendp   (*__imp_Perl_regendp)
+ #define  Perl_regeol   (*__imp_Perl_regeol)
+ #define  Perl_reginput   (*__imp_Perl_reginput)
+ #define  Perl_reglastparen   (*__imp_Perl_reglastparen)
+ #define  Perl_regnaughty   (*__imp_Perl_regnaughty)
+ #define  Perl_regnpar   (*__imp_Perl_regnpar)
+ #define  Perl_regparse   (*__imp_Perl_regparse)
+ #define  Perl_regprecomp   (*__imp_Perl_regprecomp)
+ #define  Perl_regprev   (*__imp_Perl_regprev)
+ #define  Perl_regsawback   (*__imp_Perl_regsawback)
+ #define  Perl_regsize   (*__imp_Perl_regsize)
+ #define  Perl_regstartp   (*__imp_Perl_regstartp)
+ #define  Perl_regtill   (*__imp_Perl_regtill)
+ #define  Perl_regxend   (*__imp_Perl_regxend)
+ #define  Perl_retstack   (*__imp_Perl_retstack)
+ #define  Perl_retstack_ix   (*__imp_Perl_retstack_ix)
+ #define  Perl_retstack_max   (*__imp_Perl_retstack_max)
+ #define  Perl_rsfp   (*__imp_Perl_rsfp)
+ #define  Perl_rsfp_filters   (*__imp_Perl_rsfp_filters)
+ #define  Perl_savestack   (*__imp_Perl_savestack)
+ #define  Perl_savestack_ix   (*__imp_Perl_savestack_ix)
+ #define  Perl_savestack_max   (*__imp_Perl_savestack_max)
+ #define  Perl_scopestack   (*__imp_Perl_scopestack)
+ #define  Perl_scopestack_ix   (*__imp_Perl_scopestack_ix)
+ #define  Perl_scopestack_max   (*__imp_Perl_scopestack_max)
+ #define  Perl_scrgv   (*__imp_Perl_scrgv)
+ #define  Perl_sh_path   (*__imp_Perl_sh_path)
+ #define  Perl_sig_name   (*__imp_Perl_sig_name)
+ #define  Perl_sig_num   (*__imp_Perl_sig_num)
+ #define  Perl_siggv   (*__imp_Perl_siggv)
+ #define  Perl_stack_base   (*__imp_Perl_stack_base)
+ #define  Perl_stack_max   (*__imp_Perl_stack_max)
+ #define  Perl_stack_sp   (*__imp_Perl_stack_sp)
+ #define  Perl_statbuf   (*__imp_Perl_statbuf)
+ #define  Perl_sub_generation   (*__imp_Perl_sub_generation)
+ #define  Perl_subline   (*__imp_Perl_subline)
+ #define  Perl_subname   (*__imp_Perl_subname)
+ #define  Perl_sv_no   (*__imp_Perl_sv_no)
+ #define  Perl_sv_undef   (*__imp_Perl_sv_undef)
+ #define  Perl_sv_yes   (*__imp_Perl_sv_yes)
+ #define  Perl_tainting   (*__imp_Perl_tainting)
+ #define  Perl_thisexpr   (*__imp_Perl_thisexpr)
+ #define  Perl_timesbuf   (*__imp_Perl_timesbuf)
+ #define  Perl_tokenbuf   (*__imp_Perl_tokenbuf)
+ #define  Perl_uid   (*__imp_Perl_uid)
+ #define  Perl_vert   (*__imp_Perl_vert)
+ #define  Perl_vtbl_amagic   (*__imp_Perl_vtbl_amagic)
+ #define  Perl_vtbl_amagicelem   (*__imp_Perl_vtbl_amagicelem)
+ #define  Perl_vtbl_arylen   (*__imp_Perl_vtbl_arylen)
+ #define  Perl_vtbl_bm   (*__imp_Perl_vtbl_bm)
+ #define  Perl_vtbl_collxfrm   (*__imp_Perl_vtbl_collxfrm)
+ #define  Perl_vtbl_dbline   (*__imp_Perl_vtbl_dbline)
+ #define  Perl_vtbl_env   (*__imp_Perl_vtbl_env)
+ #define  Perl_vtbl_envelem   (*__imp_Perl_vtbl_envelem)
+ #define  Perl_vtbl_fm   (*__imp_Perl_vtbl_fm)
+ #define  Perl_vtbl_glob   (*__imp_Perl_vtbl_glob)
+ #define  Perl_vtbl_isa   (*__imp_Perl_vtbl_isa)
+ #define  Perl_vtbl_isaelem   (*__imp_Perl_vtbl_isaelem)
+ #define  Perl_vtbl_itervar   (*__imp_Perl_vtbl_itervar)
+ #define  Perl_vtbl_mglob   (*__imp_Perl_vtbl_mglob)
+ #define  Perl_vtbl_nkeys   (*__imp_Perl_vtbl_nkeys)
+ #define  Perl_vtbl_pack   (*__imp_Perl_vtbl_pack)
+ #define  Perl_vtbl_packelem   (*__imp_Perl_vtbl_packelem)
+ #define  Perl_vtbl_pos   (*__imp_Perl_vtbl_pos)
+ #define  Perl_vtbl_sig   (*__imp_Perl_vtbl_sig)
+ #define  Perl_vtbl_sigelem   (*__imp_Perl_vtbl_sigelem)
+ #define  Perl_vtbl_substr   (*__imp_Perl_vtbl_substr)
+ #define  Perl_vtbl_sv   (*__imp_Perl_vtbl_sv)
+ #define  Perl_vtbl_taint   (*__imp_Perl_vtbl_taint)
+ #define  Perl_vtbl_uvar   (*__imp_Perl_vtbl_uvar)
+ #define  Perl_vtbl_vec   (*__imp_Perl_vtbl_vec)
+ #define  Perl_xiv_arenaroot   (*__imp_Perl_xiv_arenaroot)
+ #define  Perl_xiv_root   (*__imp_Perl_xiv_root)
+ #define  Perl_xnv_root   (*__imp_Perl_xnv_root)
+ #define  Perl_xpv_root   (*__imp_Perl_xpv_root)
+ #define  Perl_xrv_root   (*__imp_Perl_xrv_root)
+ #define  ampergv   (*__imp_ampergv)
+ #define  argvgv   (*__imp_argvgv)
+ #define  argvoutgv   (*__imp_argvoutgv)
+ #define  basetime   (*__imp_basetime)
+ #define  beginav   (*__imp_beginav)
+ #define  bodytarget   (*__imp_bodytarget)
+ #define  cddir   (*__imp_cddir)
+ #define  chopset   (*__imp_chopset)
+ #define  comppad_name_floor   (*__imp_comppad_name_floor)
+ #define  copline   (*__imp_copline)
+ #define  curpm   (*__imp_curpm)
+ #define  curstack   (*__imp_curstack)
+ #define  curstash   (*__imp_curstash)
+ #define  curstname   (*__imp_curstname)
+ #define  cxstack   (*__imp_cxstack)
+ #define  cxstack_ix   (*__imp_cxstack_ix)
+ #define  cxstack_max   (*__imp_cxstack_max)
+ #define  dbargs   (*__imp_dbargs)
+ #define  debdelim   (*__imp_debdelim)
+ #define  debname   (*__imp_debname)
+ #define  debstash   (*__imp_debstash)
+ #define  debug   (*__imp_debug)
+ #define  defgv   (*__imp_defgv)
+ #define  defoutgv   (*__imp_defoutgv)
+ #define  defstash   (*__imp_defstash)
+ #define  delaymagic   (*__imp_delaymagic)
+ #define  diehook   (*__imp_diehook)
+ #define  dirty   (*__imp_dirty)
+ #define  dlevel   (*__imp_dlevel)
+ #define  dlmax   (*__imp_dlmax)
+ #define  do_undump   (*__imp_do_undump)
+ #define  doextract   (*__imp_doextract)
+ #define  doswitches   (*__imp_doswitches)
+ #define  dowarn   (*__imp_dowarn)
+ #define  dumplvl   (*__imp_dumplvl)
+ #define  e_fp   (*__imp_e_fp)
+ #define  e_tmpname   (*__imp_e_tmpname)
+ #define  endav   (*__imp_endav)
+ #define  errgv   (*__imp_errgv)
+ #define  eval_root   (*__imp_eval_root)
+ #define  eval_start   (*__imp_eval_start)
+ #define  fdpid   (*__imp_fdpid)
+ #define  filemode   (*__imp_filemode)
+ #define  firstgv   (*__imp_firstgv)
+ #define  forkprocess   (*__imp_forkprocess)
+ #define  formfeed   (*__imp_formfeed)
+ #define  formtarget   (*__imp_formtarget)
+ #define  gensym   (*__imp_gensym)
+ #define  in_eval   (*__imp_in_eval)
+ #define  incgv   (*__imp_incgv)
+ #define  inplace   (*__imp_inplace)
+ #define  last_in_gv   (*__imp_last_in_gv)
+ #define  lastfd   (*__imp_lastfd)
+ #define  lastscream   (*__imp_lastscream)
+ #define  lastsize   (*__imp_lastsize)
+ #define  lastspbase   (*__imp_lastspbase)
+ #define  laststatval   (*__imp_laststatval)
+ #define  laststype   (*__imp_laststype)
+ #define  leftgv   (*__imp_leftgv)
+ #define  lineary   (*__imp_lineary)
+ #define  localizing   (*__imp_localizing)
+ #define  localpatches   (*__imp_localpatches)
+ #define  main_cv   (*__imp_main_cv)
+ #define  main_root   (*__imp_main_root)
+ #define  main_start   (*__imp_main_start)
+ #define  mainstack   (*__imp_mainstack)
+ #define  maxscream   (*__imp_maxscream)
+ #define  maxsysfd   (*__imp_maxsysfd)
+ #define  minus_F   (*__imp_minus_F)
+ #define  minus_a   (*__imp_minus_a)
+ #define  minus_c   (*__imp_minus_c)
+ #define  minus_l   (*__imp_minus_l)
+ #define  minus_n   (*__imp_minus_n)
+ #define  minus_p   (*__imp_minus_p)
+ #define  multiline   (*__imp_multiline)
+ #define  mystack_base   (*__imp_mystack_base)
+ #define  mystack_max   (*__imp_mystack_max)
+ #define  mystack_sp   (*__imp_mystack_sp)
+ #define  mystrk   (*__imp_mystrk)
+ #define  nice_chunk   (*__imp_nice_chunk)
+ #define  nice_chunk_size   (*__imp_nice_chunk_size)
+ #define  nrs   (*__imp_nrs)
+ #define  ofmt   (*__imp_ofmt)
+ #define  ofs   (*__imp_ofs)
+ #define  ofslen   (*__imp_ofslen)
+ #define  oldlastpm   (*__imp_oldlastpm)
+ #define  oldname   (*__imp_oldname)
+ #define  op_mask   (*__imp_op_mask)
+ #define  origargc   (*__imp_origargc)
+ #define  origargv   (*__imp_origargv)
+ #define  origfilename   (*__imp_origfilename)
+ #define  ors   (*__imp_ors)
+ #define  orslen   (*__imp_orslen)
+ #define  pad_reset_pending   (*__imp_pad_reset_pending)
+ #define  padix_floor   (*__imp_padix_floor)
+ #define  parsehook   (*__imp_parsehook)
+ #define  patchlevel   (*__imp_patchlevel)
+ #define  perl_destruct_level   (*__imp_perl_destruct_level)
+ #define  perldb   (*__imp_perldb)
+ #define  preambleav   (*__imp_preambleav)
+ #define  preambled   (*__imp_preambled)
+ #define  preprocess   (*__imp_preprocess)
+ #define  regflags   (*__imp_regflags)
+ #define  restartop   (*__imp_restartop)
+ #define  rightgv   (*__imp_rightgv)
+ #define  rs   (*__imp_rs)
+ #define  runlevel   (*__imp_runlevel)
+ #define  sawampersand   (*__imp_sawampersand)
+ #define  sawstudy   (*__imp_sawstudy)
+ #define  sawvec   (*__imp_sawvec)
+ #define  screamfirst   (*__imp_screamfirst)
+ #define  screamnext   (*__imp_screamnext)
+ #define  secondgv   (*__imp_secondgv)
+ #define  signalstack   (*__imp_signalstack)
+ #define  sortcop   (*__imp_sortcop)
+ #define  sortstack   (*__imp_sortstack)
+ #define  sortstash   (*__imp_sortstash)
+ #define  splitstr   (*__imp_splitstr)
+ #define  statcache   (*__imp_statcache)
+ #define  statgv   (*__imp_statgv)
+ #define  statname   (*__imp_statname)
+ #define  statusvalue   (*__imp_statusvalue)
+ #define  stdingv   (*__imp_stdingv)
+ #define  strchop   (*__imp_strchop)
+ #define  strtab   (*__imp_strtab)
+ #define  sv_arenaroot   (*__imp_sv_arenaroot)
+ #define  sv_count   (*__imp_sv_count)
+ #define  sv_objcount   (*__imp_sv_objcount)
+ #define  sv_root   (*__imp_sv_root)
+ #define  tainted   (*__imp_tainted)
+ #define  tmps_floor   (*__imp_tmps_floor)
+ #define  tmps_ix   (*__imp_tmps_ix)
+ #define  tmps_max   (*__imp_tmps_max)
+ #define  tmps_stack   (*__imp_tmps_stack)
+ #define  top_env   (*__imp_top_env)
+ #define  toptarget   (*__imp_toptarget)
+ #define  unsafe   (*__imp_unsafe)
+ #define  warnhook   (*__imp_warnhook)
diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/gcc2 perl5.003_94/gcc2
*** //e/temp2/perl5.003_94/gcc2	Tue Apr 01 16:01:59 1997
--- perl5.003_94/gcc2	Tue Mar 25 18:01:47 1997
***************
*** 0 ****
--- 1,19 ----
+ #!/bin/sh
+ 
+ 
+ # gcc wrapper for building dynamic lib version of perl
+ #  if -buildperl found on command line, then all args passed to
+ #     perlgcc, else pass all args to gcc.
+ #  jc 3/24/97
+ #
+ results=`echo "$*" | grep "\-buildperl"`
+ # echo "results = <$results>"
+ #if ( "$results" .eq. ""); then
+ # if `sh -c echo '$*' | grep buildperl >/dev/null 2>&1`; then
+ case "$results" in
+ 	"") gcc $*;;
+ 	*) miniperl perlgcc $*;;
+ esac
+ 	
+ 
+ 
diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/hints/gnuwin32.sh perl5.003_94/hints/gnuwin32.sh
*** //e/temp2/perl5.003_94/hints/gnuwin32.sh	Tue Apr 01 16:02:05 1997
--- perl5.003_94/hints/gnuwin32.sh	Thu Mar 27 15:32:05 1997
***************
*** 0 ****
--- 1,50 ----
+ #! /bin/sh
+ # gnuwin32.sh - hintsfile for building perl on Windows NT using the
+ #     Cygnus Win32 Development Kit.
+ #     See "http://www.cygnus.com/misc/gnu-win32/" to learn about the kit.
+ #
+ path_sep=\;
+ exe_ext='.exe'
+ firstmakefile='GNUmakefile'
+ if test -f $sh.exe; then sh=$sh.exe; fi
+ startsh="#!$sh"
+ cc='gcc2'
+ ld='ld2'
+ usrinc='/gnuwin32/H-i386-cygwin32/i386-cygwin32/include'
+ libpth='/gnuwin32/H-i386-cygwin32/i386-cygwin32/lib /gnuwin32/H-i386-cygwin32/lib'
+ libs='-lcygwin -lm -lc -lkernel32'
+ # dynamic lib stuff
+ so='dll'
+ #i_dlfcn='define'
+ dlsrc='dl_gnuwin32.xs'
+ usedl='y'
+ # flag to include the perl.exe export variable translation file extLibInc.h when
+ # building extension libs
+ cccdlflags='-DCYGWIN32 -DDLLIMPORT '
+ # flag that signals gcc2 to build exportable perl
+ ccdlflags='-buildperl '
+ lddlflags='-L../.. -L/gnuwin32/H-i386-cygwin32/i386-cygwin32/lib -lperlexp -lcygwin'
+ d_voidsig='undef'
+ extensions='Fcntl IO Opcode SDBM_File'
+ lns='cp'
+ signal_t='int'
+ useposix='false'
+ rd_nodata='0'
+ eagain='EAGAIN'
+ archname='gnuwin32'
+ #
+ 
+ installbin='/usr/local/bin'
+ installman1dir=''
+ installman3dir=''
+ installprivlib='/usr/local/lib/perl5'
+ installscript='/usr/local/bin'
+ 
+ installsitelib='/usr/local/lib/perl5/site_perl'
+ libc='/gnuwin32/H-i386-cygwin32/i386-cygwin32/lib/libc.a'
+ 
+ perlpath='/usr/local/bin/perl'
+ 
+ sitelib='/usr/local/lib/perl5/site_perl'
+ sitelibexp='/usr/local/lib/perl5/site_perl'
+ usrinc='/gnuwin32/H-i386-cygwin32/i386-cygwin32/include'
diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/ld2 perl5.003_94/ld2
*** //e/temp2/perl5.003_94/ld2	Tue Apr 01 16:01:59 1997
--- perl5.003_94/ld2	Tue Apr 01 13:58:09 1997
***************
*** 0 ****
--- 1,4 ----
+ #!/bin/sh
+ PERLPATH=/perl5.003_94
+ # pass all args to the perl ld wrapper
+ $PERLPATH/perl $PERLPATH/perlld $*
diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/perl.h perl5.003_94/perl.h
*** //e/temp2/perl5.003_94/perl.h	Fri Mar 21 20:45:47 1997
--- perl5.003_94/perl.h	Thu Mar 27 15:13:23 1997
***************
*** 994,1003 ****
  #include "util.h"
  #include "form.h"
  #include "gv.h"
  #include "cv.h"
- #include "opcode.h"
  #include "op.h"
  #include "cop.h"
  #include "av.h"
  #include "hv.h"
  #include "mg.h"
--- 994,1007 ----
  #include "util.h"
  #include "form.h"
  #include "gv.h"
  #include "cv.h"
  #include "op.h"
+ /* Work Around some problems with importing globals from dlls for cygwin32 */
+ #if defined(CYGWIN32) && defined(DLLIMPORT) 
+ #   include "extLibInc.h"
+ #endif
+ #include "opcode.h"
  #include "cop.h"
  #include "av.h"
  #include "hv.h"
  #include "mg.h"
diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/perlgcc perl5.003_94/perlgcc
*** //e/temp2/perl5.003_94/perlgcc	Tue Apr 01 16:01:59 1997
--- perl5.003_94/perlgcc	Tue Mar 25 18:38:41 1997
***************
*** 0 ****
--- 1,83 ----
+ #
+ # Perl script be a wrapper around the gnu gcc. the exportable perl.exe is built, special  
+ #   processing is done
+ #  This script is caled by the gcc2 shell script when the flag -buildperl is passed to gcc2
+ 
+ 
+ print "perlgcc: building exportable perl...\n";
+ # get all libs:
+ my @libobs;
+ my @obs;
+ my @libFlags;
+ my $libstring;
+ foreach (@ARGV){
+ 	if( /\.[a]$/){
+ 		push @libobs,$_;
+ 	}
+ 	elsif(/^\-l/){
+ 		push @libFlags,$_;
+ 	}
+ 	if( /\.[o]$/){
+ 		push @obs,$_;
+ 	}
+ }
+ $libstring = join(" ",@libobs);	
+ $obsString = join(" ",@obs);
+ $libflagString = join(" ",@libFlags);
+ 
+ # make exports file
+ my $command = "echo EXPORTS > perl.def";
+ print "$command\n";
+ system($command);
+ 
+ $command ="nm $libstring | grep '^........ [TCD] _'| grep -v _impure_ptr | sed 's/[^_]*_//' >> perl.def";
+ print "$command\n";
+ system($command);
+ 
+ # Build the perl.a lib to link to:
+ $command ="dlltool --as=as --dllname perl.exe --def perl.def --output-lib perl.a";
+ print "$command\n";
+ system($command); 
+ 
+ # change name of export lib to libperlexp so that is can be understood by ld2/perlld
+ $command ="mv perl.a libperlexp.a";  
+ print "$command\n";
+ system($command);
+ 
+ # get the full path name of a few libs:
+ my $crt0 = `gcc -print-file-name=crt0.o`;
+ chomp $crt0;
+ my $libdir = `gcc -print-file-name=libcygwin.a`;
+ chomp $libdir;
+ $libdir =~ s/libcygwin\.a//g;
+ 
+ # Link exe:
+ $command = "ld --base-file perl.base -o perl.exe $crt0 $obsString $libstring -L$libdir $libflagString";
+ print "$command\n";
+ system($command);
+ 
+ $command = "dlltool --as=as --dllname perl.exe --def perl.def --base-file perl.base --output-exp perl.exp";
+ print "$command\n";
+ system($command);
+ 
+ $command = "ld --base-file perl.base perl.exp -o perl.exe $crt0 $obsString $libstring -L$libdir $libflagString";
+ print "$command\n";
+ system($command);
+ 
+ $command = "dlltool --as=as --dllname perl.exe --def perl.def --base-file perl.base --output-exp perl.exp";
+ print "$command\n";
+ system($command);
+ 
+ $command = "ld perl.exp -o perl.exe $crt0 $obsString $libstring -L$libdir $libflagString";
+ print "$command\n";
+ system($command);
+ 
+ print "perlgcc: Completed\n";
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/perlld perl5.003_94/perlld
*** //e/temp2/perl5.003_94/perlld	Tue Apr 01 16:01:59 1997
--- perl5.003_94/perlld	Sat Mar 15 21:15:53 1997
***************
*** 0 ****
--- 1,206 ----
+ #
+ # Perl script be a wrapper around the gnu ld. When a dll is specified to be built, special
+ #   processing is done, else the standard ld is called.
+ #
+ #  Modified 3/14/97 to include the impure_ptr setup routine in init.cc
+ #  Modified to make dll in current directory then copy to another dir if
+ #     a path name specified on the command name with the -o parm
+ my $args = join(" ",@ARGV); # get args
+ my $arg;
+ 
+ my @objs;
+ my @flags;
+ my $libname;
+ my $init = "init";
+ my $fixup = "fixup";
+ 
+ my $path;
+ 
+ 
+ sub writefixup;
+ sub writeInit;
+ 
+ if( $args=~/\-o (.+?)\.dll/i){
+ 	$libname = $1;
+ 	# print "libname = <$libname>\n";
+ 	# Check for path:
+ 	if( $libname =~ /($\.+?\/)(\w+$)/){
+ 		$path = $1;
+ 		$libname = $2;
+ 		# print "<$path> <$libname>\n";
+ 	}
+ 	
+ 	foreach $arg(@ARGV){
+ 		if( $arg=~/\.[oa]$/){
+ 			push @objs,$arg;
+ 			next;
+ 		}
+ 		if( $arg =~/\-o/ or $arg =~ /.+?\.dll/i ){
+ 			next;
+ 		}
+ 		push @flags,$arg;
+ 	}
+ 
+ 	writefixup();
+ 	writeInit();
+ 	$command = "gcc -c $fixup.c\n";
+ 	print $command;
+ 	system($command);
+ 	$command = "gcc -c $init.cc\n";
+ 	print $command;	
+ 	system($command);
+ 	
+ 	$command = "echo EXPORTS > $libname.def\n";
+ 	print $command;	
+ 	system($command);
+ 	$command = "nm ".join(" ",@objs)."  $init.o $fixup.o | grep '^........ [TCD] _' | sed 's/[^_]*_//' >> $libname.def\n";
+ 	print $command;	
+ 	system($command);
+ 
+ 	$command = "ld --base-file $libname.base --dll -o $libname.dll ".join(" ",@objs)."  $init.o $fixup.o ";
+  	$command .= join(" ",@flags)." -e _dll_entry\@12 \n";
+ 	print $command;	
+ 	system($command);
+ 
+ 	$command = "dlltool --as=as --dllname $libname.dll --def $libname.def --base-file $libname.base --output-exp $libname.exp\n";
+ 	print $command;	
+ 	system($command);
+ 	
+ 	$command = "ld --base-file $libname.base $libname.exp --dll -o $libname.dll ".join(" ",@objs)."   $init.o $fixup.o ";
+  	$command .= join(" ",@flags)." -e _dll_entry\@12 \n";
+ 	print $command;	
+ 	system($command);
+ 
+ 	$command = "dlltool --as=as --dllname $libname.dll --def $libname.def --base-file $libname.base --output-exp $libname.exp\n";
+ 	print $command;	
+ 	system($command);			
+ 
+ 	$command = "ld $libname.exp --dll -o $libname.dll ".join(" ",@objs)."   $init.o $fixup.o ";
+  	$command .= join(" ",@flags)." -e _dll_entry\@12 \n";
+ 	print $command;	
+ 	system($command);
+ 
+ 	print "Build the import lib\n";
+ 	$command = "dlltool --as=as --dllname $libname.dll --def $libname.def --output-lib $libname.a\n";
+ 	print $command;	
+ 	system($command);
+ 
+ 	# if there was originally a path, copy the dll and a to that location:
+ 	if($path && $path ne "./" && $path."\n" ne  "`pwd`"){
+ 		$command = "mv $libname.dll $path".$libname.".dll\n";
+ 		print $command;	
+ 		system($command);
+ 		$command = "mv $libname.a $path".$libname.".a\n";
+ 		print $command;	
+ 		system($command);
+ 		
+ 	}
+ 
+ }
+ else{  # no special processing, just call ld
+ 	$command = "ld $args\n";
+ 	print $command;	
+ 	system($command);
+ }
+ 
+ # --------------------------------------------------------------------------------
+ sub writeInit{
+ 
+ open(OUTFILE,">$init.cc") or die("Can't open $init.cc\n");
+ 
+ print OUTFILE <<'EOF';
+ /* init.cc for WIN32.
+ 
+    Copyright 1996 Cygnus Solutions
+ 
+ This program is free software; you can redistribute it and/or modify
+ it under the terms of the GNU General Public License as published by
+ the Free Software Foundation; either version 2 of the License, or
+ (at your option) any later version.
+ 
+ This program is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ GNU General Public License for more details.
+ 
+ You should have received a copy of the GNU General Public License
+ along with this program; if not, write to the Free Software
+ Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.  */
+ 
+ // Added impure_ptr initialization routine. This is needed for any DLL that needs
+ //   to output to the main (calling) executable's stdout, stderr, etc. This routine
+ //   needs to be called from the executable using the DLL before any other DLL 
+ //   routines are called.  jc 3/14/97
+ 
+ #include <windows.h> 
+ 
+ extern "C" 
+ {
+   int WINAPI dll_entry (HANDLE h, DWORD reason, void *ptr);
+   void impure_setup(struct _reent *_impure_ptrMain);
+ };
+ 
+ struct _reent *_impure_ptr;  // this will be the Dlls local copy of impure ptr
+ 
+ int WINAPI dll_entry (HANDLE , 
+ 		     DWORD reason,
+ 		     void *)
+ {
+   switch (reason) 
+     {
+     case DLL_PROCESS_ATTACH:
+       break;
+     case DLL_PROCESS_DETACH:
+       break;
+     case DLL_THREAD_ATTACH:
+       break;
+     case DLL_THREAD_DETACH:
+       break;
+     }
+   return 1;
+ }
+ 
+ 
+ //********************************************
+ // Function to set our local (in this dll) copy of impure_ptr to the
+ // main's (calling executable's) impure_ptr
+ void impure_setup(struct _reent *_impure_ptrMain){
+ 
+ 	_impure_ptr = _impure_ptrMain;
+ 
+ }
+ EOF
+ 
+ close OUTFILE;
+ 
+ }
+ 
+ # ------------------------------------------------------------------------------------------
+ sub writefixup{
+ 
+ open(OUTFILE,">$fixup.c") or die("Can't open $fixup.c\n");
+ 
+ print OUTFILE <<'EOF';
+ /* This is needed to terminate the list of inport stuff */
+ /* Copied from winsup/dcrt0.cc in the cygwin32 source distribution. */
+ 	asm(".section .idata$3\n" ".long 0,0,0,0, 0,0,0,0");
+ 
+ EOF
+ close OUTFILE;
+ }
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
+ 
diff -C 4 -r -x \.o$ //e/temp2/perl5.003_94/pp_sys.c perl5.003_94/pp_sys.c
*** //e/temp2/perl5.003_94/pp_sys.c	Thu Mar 20 20:38:29 1997
--- perl5.003_94/pp_sys.c	Thu Mar 27 15:05:01 1997
***************
*** 3972,3980 ****
  
  PP(pp_spwent)
  {
      dSP;
! #ifdef HAS_PASSWD
      setpwent();
      RETPUSHYES;
  #else
      DIE(no_func, "setpwent");
--- 3972,3981 ----
  
  PP(pp_spwent)
  {
      dSP;
!  /* CYGWIN32 is missing setpwent(), (but has the others!) */
! #if 0
      setpwent();
      RETPUSHYES;
  #else
      DIE(no_func, "setpwent");