This is the mail archive of the cygwin@sourceware.cygnus.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]

RE: permissions


Why do not you post the cygcheck output as Ernie suggested.
i think you have something unusual in PATH.  Your compilation
problems
does look like some sort of Cygwin installation problem.



> -----Original Message-----
> From: cygwin-owner@sourceware.cygnus.com
> [mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of
> Mike MacDonald
> Sent: Friday, October 29, 1999 5:34 PM
> To: 'ssiddiqi@nspm.ipass.net'; 'Mike MacDonald';
> 'cygwin@sourceware.cygnus.com'
> Subject: RE: permissions
>
>
> I think I know the problem you are talking about, I had a
> Makefile that
> referenced /bin/gcc instead of just gcc - that seemed to
> cause a -remap
> error..  Weird though..  This is not that one..  It
> really has to be
> something pretty stupid..
>
> -----Original Message-----
> From: Suhaib Siddiqi [mailto:sssiddiqi@ipass.net]
> Sent: Friday, October 29, 1999 5:23 PM
> To: Mike MacDonald; cygwin@sourceware.cygnus.com
> Subject: RE: permissions
>
>
>
> No idea.  Maybe some GCC guru like Mumit could help.
>
> I do remember a while ago getting the -remap error, but
> the problem
> was
> in my Makefiles.  I do not remember what exactly I did to fix it.
>
> Suhaib
>
> > -----Original Message-----
> > From: cygwin-owner@sourceware.cygnus.com
> > [mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of
> > Mike MacDonald
> > Sent: Friday, October 29, 1999 4:57 PM
> > To: 'cygwin@sourceware.cygnus.com'
> > Subject: FW: permissions
> >
> >
> >
> >
> > -----Original Message-----
> > From: Mike MacDonald
> > Sent: Friday, October 29, 1999 4:55 PM
> > To: 'ssiddiqi@nspm.ipass.net'
> > Subject: RE: permissions
> >
> >
> > Not in makefiles..  It happens when I create a file named
> > mtest.c with:
> >
> > void f(){}
> >
> > and then do:
> >
> > gcc -o mtest mtest.c
> >
> > And I get the errors :(
> >
> > I did a cpp -v and a gcc --version and the versions matched up..
> > Everything is mounted binary..
> >
> > Its weird.. I really don't want to reinstall again..  I
> > may have a library
> > floating around or something that I don't know about..  I
> > went through and
> > checked all the major ones though..
> >
> > -----Original Message-----
> > From: Suhaib Siddiqi [mailto:sssiddiqi@ipass.net]
> > Sent: Friday, October 29, 1999 4:33 PM
> > To: Mike MacDonald; 'Larry Hall (RFK Partners, Inc)'
> > Cc: cygwin@sourceware.cygnus.com
> > Subject: RE: permissions
> >
> >
> >
> > -remap must somewhere in your Makefiles.  Check
> configure scripts.
> > make sure you have only one and the latest version of cpp.exe in
> > your PATH.
> > If you are using network mounted drive, Cygwin may run
> > slow.  When I
> > compile a big project on my Windows Nt machine, i always first
> > logout
> > from Netware server and unmount the netware mounted
> > drives... for me
> > it helped.
> >
> > Suhaib
> >
> > > -----Original Message-----
> > > From: cygwin-owner@sourceware.cygnus.com
> > > [mailto:cygwin-owner@sourceware.cygnus.com]On Behalf Of
> > > Mike MacDonald
> > > Sent: Friday, October 29, 1999 4:22 PM
> > > To: 'Larry Hall (RFK Partners, Inc)'
> > > Cc: 'cygwin@sourceware.cygnus.com'
> > > Subject: RE: permissions
> > >
> > >
> > > Cool, thanx!  The latest snapshot is much faster than my
> > > older one, but
> > > compiling still takes up like 100% of my P2 450 with
> > > 256mb of ram..  Am I
> > > doing something wrong?
> > >
> > > Also, when I install any version of gcc 2.95 (pgcc or
> > > gcc) it doesn't work..
> > > I get a bunch of cpp doesn't understand -remap errors and
> > > it dies..   egcs
> > > 2.91 works fine..  I tried everything, and I'm sure I'm
> > > using the right
> > > libs, and cpp.exe and everything..
> > >
> > > Know anything about these things?
> > >
> > >
> > > -----Original Message-----
> > > From: Larry Hall (RFK Partners, Inc) [mailto:lhall@rfk.com]
> > > Sent: Friday, October 29, 1999 4:09 PM
> > > To: Mike MacDonald
> > > Subject: RE: permissions
> > >
> > >
> > > Yes, ntsec is on by default in the snapshots.  Unless you
> > > have things set
> > > up just right, this will cause trouble.  You can find
> > > info about how to
> > > set things up for ntsec in the mail archives (can't
> > > remember if it was the
> > > cygwin list archives or the cygwin-developers list
> > > archives though).  If
> > > you don't care about using ntsec, its fine to turn it off
> > > as you have...
> > >
> > > Larry
> > >
> > >
> > > At 04:00 PM 10/29/99 -0400, you wrote:
> > > >Well, I have it working now I think..
> > > >
> > > >Its the latest dll..  It just doesn't set permissions
> > > properly..  I think
> > > >its disabled now, and I think its set up right, but I
> > > dunno..  I put the
> > > >nontsec in my CYGWIN variable, and set the permissions
> > > through nt..  Now it
> > > >SEEMS to be working..
> > > >
> > > >-----Original Message-----
> > > >From: Larry Hall (RFK Partners, Inc) [mailto:lhall@rfk.com]
> > > >Sent: Friday, October 29, 1999 3:44 PM
> > > >To: Mike MacDonald
> > > >Subject: Re: permissions
> > > >
> > > >
> > > >At 03:36 PM 10/29/99 -0400, you wrote:
> > > >>I'm having a hell of a time with getting permissions to
> > > work right under
> > > >>nt..  Can I disable them?
> > > >>
> > > >
> > > >
> > > >Depends on what you mean by "permissions" and what DLL
> > > you're using.  Can
> > > >you be more specific?
> > > >
> > > >
> > > >Larry Hall                              lhall@rfk.com
> > > >RFK Partners, Inc.                      http://www.rfk.com
> > > >118 Washington Street                   (508) 893-9779 -
> > > RFK Office
> > > >Holliston, MA 01746                     (508) 893-9889 - FAX
> > > >                                        (508) 560-1285 -
> > > cell phone
> > > >
> > > >
> > >
> > > --
> > > Want to unsubscribe from this list?
> > > Send a message to cygwin-unsubscribe@sourceware.cygnus.com
> > >
> >
> > --
> > Want to unsubscribe from this list?
> > Send a message to cygwin-unsubscribe@sourceware.cygnus.com
> >
>
> --
> Want to unsubscribe from this list?
> Send a message to cygwin-unsubscribe@sourceware.cygnus.com
>


--
Want to unsubscribe from this list?
Send a message to cygwin-unsubscribe@sourceware.cygnus.com


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]