This is the mail archive of the
cygwin@cygwin.com
mailing list for the Cygwin project.
Re: Solved: ftpd stalls when the W2k TCP Loopback adapter is enabled
- To: "Sheldon, Ken" <ksheldon at context dot com>,"'cygwin at cygwin dot com'" <cygwin at cygwin dot com>
- Subject: Re: Solved: ftpd stalls when the W2k TCP Loopback adapter is enabled
- From: "Larry Hall (RFK Partners, Inc)" <lhall at rfk dot com>
- Date: Fri, 31 Aug 2001 15:18:18 -0400
Glad you worked something out. W2K's behavior in this area must be
controlled by the driver?? All I can say is I have no troubles with
IP addresses and my PCMCIA network card with DHCP on W2K. Of course,
I always have the card plugged in even if it's not connected to the
net.
Larry Hall lhall@rfk.com
RFK Partners, Inc. http://www.rfk.com
118 Washington Street (508) 893-9779 - RFK Office
Holliston, MA 01746 (508) 893-9889 - FAX
At 03:09 PM 8/31/2001, Sheldon, Ken wrote:
>Brute force and trial and error saves the day!
>
>Using DHCP does not seem to help in my case. W2k disables the driver (and
>therefore loses its IP address) when a cable is not connected to the
>ethernet adapter. Fortunately, TCP/IP still works for 127.0.0.1. This
>loopback address works even if the loopback adapter is disabled.
>
>So, although some programs (j2sdkee) require the loopback adapter driver to
>be running in order for the installation to succeed, this driver can be
>disabled after installation and the loopback functionality will still work.
>
>
>-----Original Message-----
>From: Larry Hall (RFK Partners, Inc) [mailto:lhall@rfk.com]
>Sent: Thursday, August 23, 2001 11:57 AM
>To: Sheldon, Ken; 'cygwin@cygwin.com'
>Subject: Re: ftpd stalls when the W2k TCP Loopback adapter is enabled
>
>
>At 12:47 PM 8/23/2001, Sheldon, Ken wrote:
> >I use a development machine that is not always connected to a network. I
> >use win2k, so when by ethernet card is not connected, the OS disables the
> >device and I lose my IP address. So, to enable an IP address, I installed
> >the w2k loopback adapter.
> >
> >The cygwin ftpd process misbehaves when the loopback adapter is enabled.
> >The initial authentication works fine, but any command that involves a PORT
> >directive (such as LS, PUT, or GET) causes the process to stall for several
> >seconds before performing the command. If I disable the loopback adapter
> >and use only an ethernet adapter, things work fine. That gives me a
> >workaround when I am connected to a network. Unfortunately, I need to do
> >development when I am completely disconnected from the network and only the
> >loopback adapter is enabled.
> >
> >I a looking for ideas on how to approach this.
>
>
>
>Doesn't it work when the ethernet card is installed but not connected to a
>network? I don't have any trouble running W2K as a DHCP client when I'm
>not connected to a network. The DHCP client SW gets me a default IP
>address when I boot up off the network and my last lease is expired...
>
>
>
>Larry Hall lhall@rfk.com
>RFK Partners, Inc. http://www.rfk.com
>118 Washington Street (508) 893-9779 - RFK Office
>Holliston, MA 01746 (508) 893-9889 - FAX
>
>--
>Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
>Bug reporting: http://cygwin.com/bugs.html
>Documentation: http://cygwin.com/docs.html
>FAQ: http://cygwin.com/faq/
--
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple
Bug reporting: http://cygwin.com/bugs.html
Documentation: http://cygwin.com/docs.html
FAQ: http://cygwin.com/faq/