This is the mail archive of the cygwin@cygwin.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Re: BSOD on cygwin


Perhaps someone else running Win98 will be able to confirm or deny 
the problems you're seeing.  I'm guessing that others will only be 
able to 'deny'.  As mentioned, BSOD is an O/S issue/bug, which means
it's at least difficult to resolve in application software and is
certainly much better resolved in the O/S itself (or quite possibly 
software drivers).  Certainly in the case that the problem is caused
by drivers (and AV software uses these too), the problem software is
not necessarily installed on a 'typical' Win 98 machine, which is why
I said I expect others won't be able to confirm your results.  I'd 
highly recommend following Igor's suggestions.  The fact that you 
can't get cygcheck to run correctly for you again makes me highly
suspicious that something on your system other than Cygwin is actually
causing your problem.  In my opinion, you're more likely to find the
source of your problem by looking outside of Cygwin.



Larry Hall                              lhall@rfk.com
RFK Partners, Inc.                      http://www.rfk.com
838 Washington Street                   (508) 893-9779 - RFK Office
Holliston, MA 01746                     (508) 893-9889 - FAX


At 06:34 PM 1/12/2003, Bhiksha Raj wrote:
>Hi,
>
>First I must apologize for my multiple posts earlier.
>I wasnt sure if the first one had gone through, since I never
>got a copy myself. So I figured Id messed up and posted again.
>
>Anyway,
>the problem (as I mentioned earlier) is that on my windows 98
>machine, with the latest cygwin, I get a blue screen of death
>when I try to run "configure --disable-shared" on guile-1.4.1.
>(Im using 1.4.1 because Im tyring to compile TeXmacs).
>
>Ive since dug around a bit, crashed my machine a hunded times,
>and collected logs. I found that the configure script dies
>on line 4791, at a line that goes 
>"if sort conftest.nm|uniq > conftest.ntM;then"
>
>I get an empty conftest.nmT and the machine dies.
>I tried running the same command from command line. The first time
>I ran it, my cygwin window froze (although my machine didnt die),
>but thereafter Ive been able to run it from command line.
>However, running the configure script kills the machine at the
>uniq again.
>
>Im attaching the configure script, the config.log, and the 
>conftest.nm files (the conftest.nmT file I get is empty).
>I hope this is not bad practice, but I figure they would help
>find the problem.
>The tail of the config.log file should indicate where exactly
>my machine dies (every time!).
>Also, as per Igor Pechtchanski's suggestion, I ran a cygcheck -s -v -r and
>am attaching the output.
>
>Curiously, cygcheck -s -v -r gave me output the first time I
>ran it. Afterwards, running the command simply gives me no output
>at all - it simply runs silently and comes back. Im not sure why
>this is so - I was pretty sure it was supposed to repeat the
>information everytime I ran it. I hope this doesnt indicate a
>bug with my setup.
>
>Many thanks for any and all help in this issue.
>
>Regards,
>Bhiksha
>bhiksha@merl.com
>
>
>On Sun, Jan 12, 2003 at 10:40:48AM -0500, Igor Pechtchanski wrote:
> > On Sun, 12 Jan 2003, Igor Pechtchanski wrote:
> > 
> > > On Sat, 11 Jan 2003, Bhiksha Raj wrote:
> > >
> > > > Hi All,
> > > >
> > > > I hope this is not the wrong forum for this:
> > > >
> > > > Im trying to install TeXmacs on my win98+cygwin laptop.
> > > > First I installed the binaries for guile from the cygwin setup
> > > > (I have XFree and Tex and all associated libs already)
> > > > downloaded TeXmacs sources, ran ./configure and then
> > > > gave a "make".
> > > > I got  the blue screen of death (BSD).
> > > > After iterating through several BSDs, I hunted on the web
> > > > and found a site that said that static linkages were a problem with
> > > > the latest guile and that I must install guile 1.4.1. So I uninstalled
> > > > guile,
> > > > downloaded the sources for guile 1.4.1, untarred them and
> > > > ran
> > > > ./configure --disable-shared
> > > >
> > > > It runs through several checks, but never completes - insted it
> > > > gives me at some point it simply gives me the blue screen of death.
> > > > This time around Im not even getting past configure.
> > > >
> > > > Im not sure what to do now.
> > > > Any advice at all would be greatly appreciated.
> > > >
> > > > Much thanks
> > > > Bhiksha
> > > > bhiksha@merl.com
> > >
> > > Bhiksha,
> > >
> > > This is a forum for all problems with Cygwin, so your question fits in
> > > nicely.  To answer it, Cygwin never *causes* a BSOD.  It may expose or
> > > trigger a bug in Windows or some process running with system privileges
> > > (antivirus programs have been blamed a lot), but Cygwin itself doesn't
> > > have enough access to the low-level OS to be able to cause a BSOD.
> > >
> > > Try turning off your antivirus program(s) and see if it makes the BSOD go
> > > away.  Another possibility is firewall or VPN software.  The output of
> > > 'cygcheck -s -v -r' as a non-inline uncompressed text *attachment*
> > > wouldn't hurt, either (as indicated in <http://cygwin.com/bugs/>).
> > >         Igor
> > > P.S. I'm sure you'll get more and better responses on Monday.
> > 
> > Whoops!  Fingers striving to be independent from the brain...  Make the
> > above link <http://cygwin.com/bugs.html> (also at the bottom of every
> > message).
> >       Igor
> > -- 
> >                               http://cs.nyu.edu/~pechtcha/
> >       |\      _,,,---,,_              pechtcha@cs.nyu.edu
> > ZZZzz /,`.-'`'    -.  ;-;;,_          igor@watson.ibm.com
> >      |,4-  ) )-,_. ,\ (  `'-'         Igor Pechtchanski
> >     '---''(_/--'  `-'\_) fL   a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!
> > 
> > Oh, boy, virtual memory! Now I'm gonna make myself a really *big* RAMdisk!
> >   -- /usr/games/fortune
> > 
> > 
> > --
> > Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> > Bug reporting:         http://cygwin.com/bugs.html
> > Documentation:         http://cygwin.com/docs.html
> > FAQ:                   http://cygwin.com/faq/
> > 
>
>
>
>
>--
>Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
>Bug reporting:         http://cygwin.com/bugs.html
>Documentation:         http://cygwin.com/docs.html
>FAQ:                   http://cygwin.com/faq/ 


#################################################################
#################################################################
#################################################################
#####
#####
#####
#################################################################
#################################################################
#################################################################

#################################################################
#################################################################
#################################################################
#####
#####
#####
#################################################################
#################################################################
#################################################################


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]