This is the mail archive of the cygwin@cygwin.com mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

RE: Problem with stopping postmaster with pg_ctl


My bad!!  Thanks!!

Here's the new work-around script .......

#! /bin/sh
#-------------------------------------------------------------------------
#
# pg_ctl.sh--
#    Start/Stop/Restart/HUP/Report status of postmaster
#
# Copyright (c) 2001  PostgreSQL Global Development Group
#
#
# IDENTIFICATION
#    $Header: /cvsroot/pgsql-server/src/bin/pg_ctl/pg_ctl.sh,v 1.30
2002/10/18 22:05:35 petere Exp $
#
#-------------------------------------------------------------------------

CMDNAME=`basename $0`

help="\
$CMDNAME is a utility to start, stop, restart, reload configuration files,
or report the status of a PostgreSQL server.

Usage:
  $CMDNAME start   [-w] [-D DATADIR] [-s] [-l FILENAME] [-o \"OPTIONS\"]
  $CMDNAME stop    [-W] [-D DATADIR] [-s] [-m SHUTDOWN-MODE]
  $CMDNAME restart [-w] [-D DATADIR] [-s] [-m SHUTDOWN-MODE] [-o
\"OPTIONS\"]
  $CMDNAME reload  [-D DATADIR] [-s]
  $CMDNAME status  [-D DATADIR]

Common options:
  -D DATADIR   location of the database storage area
  -s           only print errors, no informational messages
  -w           wait until operation completes
  -W           do not wait until operation completes
  --help       show this help, then exit
  --version    output version information, then exit
(The default is to wait for shutdown, but not for start or restart.)

If the -D option is omitted, the environment variable PGDATA is used.

Options for start or restart:
  -l FILENAME             write (or append) server log to FILENAME.  The
                          use of this option is highly recommended.
  -o OPTIONS              command line options to pass to the postmaster
                          (PostgreSQL server executable)
  -p PATH-TO-POSTMASTER   normally not necessary

Options for stop or restart:
  -m SHUTDOWN-MODE   may be 'smart', 'fast', or 'immediate'

Shutdown modes are:
  smart       quit after all clients have disconnected
  fast        quit directly, with proper shutdown
  immediate   quit without complete shutdown; will lead to recovery on
restart

Report bugs to <pgsql-bugs@postgresql.org>."

advice="\
Try '$CMDNAME --help' for more information."


# Placed here during build
bindir='/usr/bin'
VERSION='7.3.4'

# protect the log file
umask 077

# Check for echo -n vs echo \c

if echo '\c' | grep -s c >/dev/null 2>&1
then
    ECHO_N="echo -n"
    ECHO_C=""
else
    ECHO_N="echo"
    ECHO_C='\c'
fi

#
# Find out where we're located
#
if echo "$0" | grep '/' > /dev/null 2>&1
then
        # explicit dir name given
        self_path=`echo "$0" | sed 's,/[^/]*$,,'`       # (dirname command
is not portable)
else
        # look for it in PATH ('which' command is not portable)
        for dir in `echo "$PATH" | sed 's/:/ /g'`
	do
                # empty entry in path means current dir
                [ -z "$dir" ] && dir='.'
                if [ -f "$dir/$CMDNAME" ]
		then
                        self_path="$dir"
                        break
                fi
        done
fi

# Check if needed programs actually exist in path
if [ -x "$self_path/postmaster" ] && [ -x "$self_path/psql" ]; then
    PGPATH="$self_path"
elif [ -x "$bindir/postmaster" ] && [ -x "$bindir/psql" ]; then
    PGPATH="$bindir"
else
    echo "The programs 'postmaster' and 'psql' are needed by $CMDNAME but"
1>&2
    echo "were not found in the directory '$bindir'." 1>&2
    echo "Check your installation." 1>&2
    exit 1
fi

po_path="$PGPATH/postmaster"

wait=
wait_seconds=60
logfile=
silence_echo=
shutdown_mode=smart

while [ "$#" -gt 0 ]
do
    case "$1" in
	-h|--help|-\?)
	    echo "$help"
	    exit 0
	    ;;
        -V|--version)
	    echo "pg_ctl (PostgreSQL) $VERSION"
	    exit 0
	    ;;
	-D)
	    shift
	    # pass environment into new postmaster
	    PGDATA="$1"
	    export PGDATA
	    ;;
	-l)
	    logfile="$2"
	    shift;;
	-l*)
	    logfile=`echo "$1" | sed 's/^-l//'`
	    ;;
	-m)
	    shutdown_mode="$2"
	    shift;;
	-m*)
	    shutdown_mode=`echo "$1" | sed 's/^-m//'`
	    ;;
	-o)
	    shift
	    POSTOPTS="$1"
	    ;;
	-p)
	    shift
	    po_path="$1"
	    ;;
	-s)
	    silence_echo=:
	    ;;
	-w)
	    wait=yes
	    ;;
	-W)
	    wait=no
	    ;;
	-*)
	    echo "$CMDNAME: invalid option: $1" 1>&2
	    echo "$advice" 1>&2
	    exit 1
	    ;;
	start)
	    op="start"
	    ;;
	stop)
	    op="stop"
	    ;;
	restart)
	    op="restart"
	    ;;
	reload)
	    op="reload"
	    ;;
	status)
	    op="status"
	    ;;
	*)
	    echo "$CMDNAME: invalid operation mode: $1" 1>&2
	    echo "$advice" 1>&2
	    exit 1
	    ;;
    esac
    shift
done

if [ x"$op" = x"" ];then
    echo "$CMDNAME: no operation mode specified" 1>&2
    echo "$advice" 1>&2
    exit 1
fi

if [ -z "$PGDATA" ];then
    echo "$CMDNAME: no database directory or environment variable \$PGDATA
is specified" 1>&2
    echo "$advice" 1>&2
    exit 1
fi

if [ -z "$wait" ]; then
    case "$op" in
	start)      wait=no;;
	stop)       wait=yes;;
	restart)    wait=no;;   # must wait on shutdown anyhow
    esac
fi


case "$shutdown_mode" in
    s|smart)
	sig="-TERM"
        sig="-s 15"
	;;
    f|fast)
	sig="-INT"
        sig="-s 2"
	;;
    i|immediate)
	sig="-QUIT"
        sig="-s 3"
	;;
    *)
	echo "$CMDNAME: invalid shutdown mode: $1" 1>&2
	echo "$advice" 1>&2
	exit 1
	;;
esac

if [ "$op" = "reload" ];then
	sig="-HUP"
	sig="-s 1"
	wait=no
fi

DEFPOSTOPTS=$PGDATA/postmaster.opts.default
POSTOPTSFILE=$PGDATA/postmaster.opts
PIDFILE=$PGDATA/postmaster.pid

if [ "$op" = "status" ];then
    if [ -f "$PIDFILE" ];then
	PID=`sed -n 1p $PIDFILE`
	if [ "$PID" -lt 0 ];then
	    PID=`expr 0 - $PID`
	    echo "$CMDNAME: postgres is running (pid: $PID)"
	else
	    echo "$CMDNAME: postmaster is running (pid: $PID)"
	    echo "Command line was:"
	    cat "$POSTOPTSFILE"
	fi
	exit 0
    else
	echo "$CMDNAME: postmaster or postgres is not running"
	exit 1
    fi
fi

if [ "$op" = "stop" -o "$op" = "restart" -o "$op" = "reload" ];then
    if [ -f "$PIDFILE" ];then
	PID=`sed -n 1p $PIDFILE`
	if [ "$PID" -lt 0 ];then
	    PID=`expr 0 - $PID`
	    echo "$CMDNAME: Cannot restart postmaster.  postgres is running (pid:
$PID)" 1>&2
	    echo "Please terminate postgres and try again." 1>&2
	    exit 1
	fi

	kill "$sig" $PID

	# wait for postmaster to shut down
	if [ "$wait" = yes -o "$op" = restart ];then
	    cnt=0
	    $silence_echo $ECHO_N "waiting for postmaster to shut down..."$ECHO_C

	    while :
	    do
		if [ -f "$PIDFILE" ];then
		    $silence_echo $ECHO_N "."$ECHO_C
		    cnt=`expr $cnt + 1`
		    if [ "$cnt" -gt "$wait_seconds" ];then
			$silence_echo echo " failed"
			echo "$CMDNAME: postmaster does not shut down" 1>&2
			exit 1
		    fi
		else
		    break
		fi
		sleep 1
	    done
	    $silence_echo echo "done"
	fi

	if [ "$op" = "reload" ];then
	    $silence_echo echo "postmaster successfully signaled"
	else
	    $silence_echo echo "postmaster successfully shut down"
	fi

    else # ! -f $PIDFILE
	echo "$CMDNAME: cannot find $PIDFILE" 1>&2
	echo "Is postmaster running?" 1>&2
	if [ "$op" = "restart" ];then
	    echo "starting postmaster anyway" 1>&2
	else
	    exit 1
	fi
    fi
fi # stop, restart, reload

if [ "$op" = "start" -o "$op" = "restart" ];then
    oldpid=""
    if [ -f "$PIDFILE" ];then
	echo "$CMDNAME: Another postmaster may be running.  Trying to start
postmaster anyway." 1>&2
	oldpid=`sed -n 1p $PIDFILE`
    fi

    # no -o given
    if [ -z "$POSTOPTS" ];then
	if [ "$op" = "start" ];then
	    # if we are in start mode, then look for postmaster.opts.default
	    if [ -f "$DEFPOSTOPTS" ]; then
		eval set X "`cat $DEFPOSTOPTS`"; shift
	    fi
	else
	    # if we are in restart mode, then look for postmaster.opts
	    eval set X "`cat $POSTOPTSFILE`"; shift
            po_path="$1"
            shift
	fi
    else # -o given
        eval set X "$POSTOPTS"; shift
    fi

    if [ -n "$logfile" ]; then
        "$po_path" ${1+"$@"} </dev/null >>$logfile 2>&1 &
    else
        # when starting without log file, redirect stderr to stdout, so
        # pg_ctl can be invoked with >$logfile and still have pg_ctl's
        # stderr on the terminal.
        "$po_path" ${1+"$@"} </dev/null 2>&1 &
    fi

    # if had an old lockfile, check to see if we were able to start
    if [ -n "$oldpid" ];then
	sleep 1
	if [ -f "$PIDFILE" ];then
	    if [ "`sed -n 1p $PIDFILE`" = "$oldpid" ];then
		echo "$CMDNAME: cannot start postmaster" 1>&2
		echo "Examine the log output." 1>&2
		exit 1
	    fi
        fi
    fi

    # wait for postmaster to start
    if [ "$wait" = yes ];then
	cnt=0
	$silence_echo $ECHO_N "waiting for postmaster to start..."$ECHO_C
	while :
	do
# FIXME:  This is horribly misconceived.
# 1) If password authentication is set up, the connection will fail.
# 2) If a virtual host is set up, the connection may fail.
# 3) If network traffic filters are set up tight enough, the connection
#    may fail.
# 4) When no Unix domain sockets are available, the connection will
#    fail.  (Using TCP/IP by default ain't better.)
# 5) When a different port is configured, the connection will fail
#    or go to the wrong server.
# 6) If the dynamic loader is not set up correctly (for this user/at
#    this time), psql will fail (to find libpq).
# 7) If psql is misconfigured, this may fail.
	    if "$PGPATH/psql" -l >/dev/null 2>&1
	    then
		break;
	    else
		$silence_echo $ECHO_N "."$ECHO_C
		cnt=`expr $cnt + 1`
		if [ "$cnt" -gt "$wait_seconds" ];then
		    $silence_echo echo "failed"
		    echo "$CMDNAME: postmaster does not start" 1>&2
		    exit 1
		fi
		sleep 1
	    fi
	done
	$silence_echo echo "done"
    fi
    $silence_echo echo "postmaster successfully started"
fi # start or restart

exit 0

__________________________________________________________________
John Pagakis
Email: john@pagakis.com

"What we play is life."
        -- Louis Armstrong

This signature generated by
     ... and I Quote!!(tm) Copyright (c) 1999 SpaZmodic Frog Software, Inc.
                                              www.spazmodicfrog.com


-----Original Message-----
From: Igor Pechtchanski [mailto:pechtcha@cs.nyu.edu]
Sent: Wednesday, September 17, 2003 10:05 AM
To: John Pagakis
Cc: cygwin@cygwin.com; pgsql-cygwin@postgresql.org
Subject: RE: Problem with stopping postmaster with pg_ctl


John,

FWIW, you forgot SIGHUP (="-s 1").
	Igor

On Wed, 17 Sep 2003, John Pagakis wrote:

> That did the trick Igor!! Thanks so much!!
>
> For any with the same problem, here's the revised script:
>
> #! /bin/sh
> #-------------------------------------------------------------------------
> #
> # pg_ctl.sh--
> #    Start/Stop/Restart/HUP/Report status of postmaster
> #
> # Copyright (c) 2001  PostgreSQL Global Development Group
> #
> #
> # IDENTIFICATION
> #    $Header: /cvsroot/pgsql-server/src/bin/pg_ctl/pg_ctl.sh,v 1.30
> 2002/10/18 22:05:35 petere Exp $
> #
> #-------------------------------------------------------------------------
>
> CMDNAME=`basename $0`
>
> help="\
> $CMDNAME is a utility to start, stop, restart, reload configuration files,
> or report the status of a PostgreSQL server.
>
> Usage:
>   $CMDNAME start   [-w] [-D DATADIR] [-s] [-l FILENAME] [-o \"OPTIONS\"]
>   $CMDNAME stop    [-W] [-D DATADIR] [-s] [-m SHUTDOWN-MODE]
>   $CMDNAME restart [-w] [-D DATADIR] [-s] [-m SHUTDOWN-MODE] [-o
> \"OPTIONS\"]
>   $CMDNAME reload  [-D DATADIR] [-s]
>   $CMDNAME status  [-D DATADIR]
>
> Common options:
>   -D DATADIR   location of the database storage area
>   -s           only print errors, no informational messages
>   -w           wait until operation completes
>   -W           do not wait until operation completes
>   --help       show this help, then exit
>   --version    output version information, then exit
> (The default is to wait for shutdown, but not for start or restart.)
>
> If the -D option is omitted, the environment variable PGDATA is used.
>
> Options for start or restart:
>   -l FILENAME             write (or append) server log to FILENAME.  The
>                           use of this option is highly recommended.
>   -o OPTIONS              command line options to pass to the postmaster
>                           (PostgreSQL server executable)
>   -p PATH-TO-POSTMASTER   normally not necessary
>
> Options for stop or restart:
>   -m SHUTDOWN-MODE   may be 'smart', 'fast', or 'immediate'
>
> Shutdown modes are:
>   smart       quit after all clients have disconnected
>   fast        quit directly, with proper shutdown
>   immediate   quit without complete shutdown; will lead to recovery on
> restart
>
> Report bugs to <pgsql-bugs@postgresql.org>."
>
> advice="\
> Try '$CMDNAME --help' for more information."
>
>
> # Placed here during build
> bindir='/usr/bin'
> VERSION='7.3.4'
>
> # protect the log file
> umask 077
>
> # Check for echo -n vs echo \c
>
> if echo '\c' | grep -s c >/dev/null 2>&1
> then
>     ECHO_N="echo -n"
>     ECHO_C=""
> else
>     ECHO_N="echo"
>     ECHO_C='\c'
> fi
>
> #
> # Find out where we're located
> #
> if echo "$0" | grep '/' > /dev/null 2>&1
> then
>         # explicit dir name given
>         self_path=`echo "$0" | sed 's,/[^/]*$,,'`       # (dirname command
> is not portable)
> else
>         # look for it in PATH ('which' command is not portable)
>         for dir in `echo "$PATH" | sed 's/:/ /g'`
>         do
>                 # empty entry in path means current dir
>                 [ -z "$dir" ] && dir='.'
>                 if [ -f "$dir/$CMDNAME" ]
>                 then
>                         self_path="$dir"
>                         break
>                 fi
>         done
> fi
>
> # Check if needed programs actually exist in path
> if [ -x "$self_path/postmaster" ] && [ -x "$self_path/psql" ]; then
>     PGPATH="$self_path"
> elif [ -x "$bindir/postmaster" ] && [ -x "$bindir/psql" ]; then
>     PGPATH="$bindir"
> else
>     echo "The programs 'postmaster' and 'psql' are needed by $CMDNAME but"
> 1>&2
>     echo "were not found in the directory '$bindir'." 1>&2
>     echo "Check your installation." 1>&2
>     exit 1
> fi
>
> po_path="$PGPATH/postmaster"
>
> wait=
> wait_seconds=60
> logfile=
> silence_echo=
> shutdown_mode=smart
>
> while [ "$#" -gt 0 ]
> do
>     case "$1" in
>         -h|--help|-\?)
>             echo "$help"
>             exit 0
>             ;;
>         -V|--version)
>             echo "pg_ctl (PostgreSQL) $VERSION"
>             exit 0
>             ;;
>         -D)
>             shift
>             # pass environment into new postmaster
>             PGDATA="$1"
>             export PGDATA
>             ;;
>         -l)
>             logfile="$2"
>             shift;;
>         -l*)
>             logfile=`echo "$1" | sed 's/^-l//'`
>             ;;
>         -m)
>             shutdown_mode="$2"
>             shift;;
>         -m*)
>             shutdown_mode=`echo "$1" | sed 's/^-m//'`
>             ;;
>         -o)
>             shift
>             POSTOPTS="$1"
>             ;;
>         -p)
>             shift
>             po_path="$1"
>             ;;
>         -s)
>             silence_echo=:
>             ;;
>         -w)
>             wait=yes
>             ;;
>         -W)
>             wait=no
>             ;;
>         -*)
>             echo "$CMDNAME: invalid option: $1" 1>&2
>             echo "$advice" 1>&2
>             exit 1
>             ;;
>         start)
>             op="start"
>             ;;
>         stop)
>             op="stop"
>             ;;
>         restart)
>             op="restart"
>             ;;
>         reload)
>             op="reload"
>             ;;
>         status)
>             op="status"
>             ;;
>         *)
>             echo "$CMDNAME: invalid operation mode: $1" 1>&2
>             echo "$advice" 1>&2
>             exit 1
>             ;;
>     esac
>     shift
> done
>
> if [ x"$op" = x"" ];then
>     echo "$CMDNAME: no operation mode specified" 1>&2
>     echo "$advice" 1>&2
>     exit 1
> fi
>
> if [ -z "$PGDATA" ];then
>     echo "$CMDNAME: no database directory or environment variable \$PGDATA
> is specified" 1>&2
>     echo "$advice" 1>&2
>     exit 1
> fi
>
> if [ -z "$wait" ]; then
>     case "$op" in
>         start)      wait=no;;
>         stop)       wait=yes;;
>         restart)    wait=no;;   # must wait on shutdown anyhow
>     esac
> fi
>
>
> case "$shutdown_mode" in
>     s|smart)
>         sig="-TERM"
>         sig="-s 15"
>         ;;
>     f|fast)
>         sig="-INT"
>         sig="-s 2"
>         ;;
>     i|immediate)
>         sig="-QUIT"
>         sig="-s 3"
>         ;;
>     *)
>         echo "$CMDNAME: invalid shutdown mode: $1" 1>&2
>         echo "$advice" 1>&2
>         exit 1
>         ;;
> esac
>
> if [ "$op" = "reload" ];then
>         sig="-HUP"
>         wait=no
> fi
>
> DEFPOSTOPTS=$PGDATA/postmaster.opts.default
> POSTOPTSFILE=$PGDATA/postmaster.opts
> PIDFILE=$PGDATA/postmaster.pid
>
> if [ "$op" = "status" ];then
>     if [ -f "$PIDFILE" ];then
>         PID=`sed -n 1p $PIDFILE`
>         if [ "$PID" -lt 0 ];then
>             PID=`expr 0 - $PID`
>             echo "$CMDNAME: postgres is running (pid: $PID)"
>         else
>             echo "$CMDNAME: postmaster is running (pid: $PID)"
>             echo "Command line was:"
>             cat "$POSTOPTSFILE"
>         fi
>         exit 0
>     else
>         echo "$CMDNAME: postmaster or postgres is not running"
>         exit 1
>     fi
> fi
>
> if [ "$op" = "stop" -o "$op" = "restart" -o "$op" = "reload" ];then
>     if [ -f "$PIDFILE" ];then
>         PID=`sed -n 1p $PIDFILE`
>         if [ "$PID" -lt 0 ];then
>             PID=`expr 0 - $PID`
>             echo "$CMDNAME: Cannot restart postmaster.  postgres is
running (pid:
> $PID)" 1>&2
>             echo "Please terminate postgres and try again." 1>&2
>             exit 1
>         fi
>
>         kill "$sig" $PID
>
>         # wait for postmaster to shut down
>         if [ "$wait" = yes -o "$op" = restart ];then
>             cnt=0
>             $silence_echo $ECHO_N "waiting for postmaster to shut
down..."$ECHO_C
>
>             while :
>             do
>                 if [ -f "$PIDFILE" ];then
>                     $silence_echo $ECHO_N "."$ECHO_C
>                     cnt=`expr $cnt + 1`
>                     if [ "$cnt" -gt "$wait_seconds" ];then
>                         $silence_echo echo " failed"
>                         echo "$CMDNAME: postmaster does not shut down"
1>&2
>                         exit 1
>                     fi
>                 else
>                     break
>                 fi
>                 sleep 1
>             done
>             $silence_echo echo "done"
>         fi
>
>         if [ "$op" = "reload" ];then
>             $silence_echo echo "postmaster successfully signaled"
>         else
>             $silence_echo echo "postmaster successfully shut down"
>         fi
>
>     else # ! -f $PIDFILE
>         echo "$CMDNAME: cannot find $PIDFILE" 1>&2
>         echo "Is postmaster running?" 1>&2
>         if [ "$op" = "restart" ];then
>             echo "starting postmaster anyway" 1>&2
>         else
>             exit 1
>         fi
>     fi
> fi # stop, restart, reload
>
> if [ "$op" = "start" -o "$op" = "restart" ];then
>     oldpid=""
>     if [ -f "$PIDFILE" ];then
>         echo "$CMDNAME: Another postmaster may be running.  Trying to
start
> postmaster anyway." 1>&2
>         oldpid=`sed -n 1p $PIDFILE`
>     fi
>
>     # no -o given
>     if [ -z "$POSTOPTS" ];then
>         if [ "$op" = "start" ];then
>             # if we are in start mode, then look for
postmaster.opts.default
>             if [ -f "$DEFPOSTOPTS" ]; then
>                 eval set X "`cat $DEFPOSTOPTS`"; shift
>             fi
>         else
>             # if we are in restart mode, then look for postmaster.opts
>             eval set X "`cat $POSTOPTSFILE`"; shift
>             po_path="$1"
>             shift
>         fi
>     else # -o given
>         eval set X "$POSTOPTS"; shift
>     fi
>
>     if [ -n "$logfile" ]; then
>         "$po_path" ${1+"$@"} </dev/null >>$logfile 2>&1 &
>     else
>         # when starting without log file, redirect stderr to stdout, so
>         # pg_ctl can be invoked with >$logfile and still have pg_ctl's
>         # stderr on the terminal.
>         "$po_path" ${1+"$@"} </dev/null 2>&1 &
>     fi
>
>     # if had an old lockfile, check to see if we were able to start
>     if [ -n "$oldpid" ];then
>         sleep 1
>         if [ -f "$PIDFILE" ];then
>             if [ "`sed -n 1p $PIDFILE`" = "$oldpid" ];then
>                 echo "$CMDNAME: cannot start postmaster" 1>&2
>                 echo "Examine the log output." 1>&2
>                 exit 1
>             fi
>         fi
>     fi
>
>     # wait for postmaster to start
>     if [ "$wait" = yes ];then
>         cnt=0
>         $silence_echo $ECHO_N "waiting for postmaster to start..."$ECHO_C
>         while :
>         do
> # FIXME:  This is horribly misconceived.
> # 1) If password authentication is set up, the connection will fail.
> # 2) If a virtual host is set up, the connection may fail.
> # 3) If network traffic filters are set up tight enough, the connection
> #    may fail.
> # 4) When no Unix domain sockets are available, the connection will
> #    fail.  (Using TCP/IP by default ain't better.)
> # 5) When a different port is configured, the connection will fail
> #    or go to the wrong server.
> # 6) If the dynamic loader is not set up correctly (for this user/at
> #    this time), psql will fail (to find libpq).
> # 7) If psql is misconfigured, this may fail.
>             if "$PGPATH/psql" -l >/dev/null 2>&1
>             then
>                 break;
>             else
>                 $silence_echo $ECHO_N "."$ECHO_C
>                 cnt=`expr $cnt + 1`
>                 if [ "$cnt" -gt "$wait_seconds" ];then
>                     $silence_echo echo "failed"
>                     echo "$CMDNAME: postmaster does not start" 1>&2
>                     exit 1
>                 fi
>                 sleep 1
>             fi
>         done
>         $silence_echo echo "done"
>     fi
>     $silence_echo echo "postmaster successfully started"
> fi # start or restart
>
> exit 0
>
> __________________________________________________________________
> John Pagakis
> Email: john@pagakis.com
>
> Cheese -- Milk's leap towards immortality.
>        -- Clifton Fadiman
>
> This signature generated by
>      ... and I Quote!!(tm) Copyright (c) 1999 SpaZmodic Frog Software,
Inc.
>                                               www.spazmodicfrog.com
>
>
> -----Original Message-----
> From: Igor Pechtchanski [mailto:pechtcha@cs.nyu.edu]
> Sent: Wednesday, September 17, 2003 8:51 AM
> To: John Pagakis
> Cc: cygwin@cygwin.com
> Subject: RE: Problem with stopping postmaster with pg_ctl
>
>
> John,
>
> This turned out to be a problem with /bin/kill.exe in Cygwin 1.5.4, which
> should be fixed in the next release
> (<http://cygwin.com/ml/cygwin/2003-09/msg01101.html>).  If you're
> adventurous, try the snapshot.  Otherwise, a couple of quick workarounds
> until /bin/kill is fixed are to use different syntax or use bash's builtin
> kill.  For the former, change "kill -15 $PID" to "kill -s 15 $PID".  For
> the latter, either change the #! line in pg_ctl to "#!/bin/bash" instead
> of "#!/bin/sh", or force bash's kill by using 'bash -c "kill -15 $PID"'
> instead of "kill -15 $PID".
>
> Both of these will become unnecessary in the next Cygwin release, but
> won't hurt, and should keep you running until then.  Hope this helps,
>         Igor
>
> On Wed, 17 Sep 2003, John Pagakis wrote:
>
> > Oh, I meant /bin/kill not /etc/kill on that last post .....
> >
> > The way Postgres controls things is, when it starts up, it stores the
PID
> it
> > started under in a file called postgresql.pid in the data directory.
When
> > you use "pg_ctl stop", it reads the pid file and the issues a kill -15
on
> > that pid.  It then sits and waits for postgresql.pid to disappear.
After
> > one minute, if the file is still there, the script gives up and
announces
> > that the postmaster will not stop.
> >
> > If you try this, you'll notice that when you get to the kill in the
> script,
> > you'll get the Usage info on screen.  There is nothing wrong with how
> pg_ctl
> > is formatting the kill.  If you echo out that command and execute it
from
> > the command line, it works just fine.
> >
> > I believe the problem is Cygwin's implementation of kill.  From the
> command
> > line if you say kill -sig pid, it works.  If you say /bin/kill -sig pid
it
> > gives you Usage.  There is something about when you give the fully
> qualified
> > path that it finds offensive.  The script does not give the fully
> qualified
> > path, but based on the behavior, I'm guessing the interpreter resolves
to
> > the fully qualified path before executing.
> >
> > Anyway, BEFORE you exit, do this:
> >
> > 1) ps
> > This gives you a list of active processes.
> >
> > 2) Find the pid for postgres who's ppid is 1.
> >
> > 3) kill -15 that pid.
> >
> > 4) Wait for the message that the database is shut down.
> >
> > Now you can exit.
> >
> > __________________________________________________________________
> > John Pagakis
> > Email: john@pagakis.com
> >
> > "With all your science can you tell how it is, and whence it is, that
> >  light comes into the soul?"
> >         -- Henry David Thoreau
> >
> > This signature generated by
> >      ... and I Quote!!(tm) Copyright (c) 1999 SpaZmodic Frog Software,
> Inc.
> >                                               www.spazmodicfrog.com
> >
> >
> > -----Original Message-----
> > From: Igor Pechtchanski [mailto:pechtcha@cs.nyu.edu]
> > Sent: Tuesday, September 16, 2003 1:47 PM
> > To: John Pagakis
> > Cc: pgsql-cygwin@postgresql.org; cygwin@cygwin.com
> > Subject: Re: Problem with stopping postmaster with pg_ctl
> >
> >
> > On Tue, 16 Sep 2003, John Pagakis wrote:
> >
> > > I'm trying to get Postgres working under Cygwin.  The good news is, it
> > > mostly is.  The bad news is, I can't shut it down with pg_ctl.
> > >
> > > I loaded the full Cygwin installation on my Win2K Pro machine, and
later
> > on
> > > my XP Pro box.  Both behave the same way.
> > >
> > > When I run pg_ctl stop, it motors for the duration of the wait period
> and
> > > then says the postmaster does not shut down.
> > >
> > > Upon further review ......
> > >
> > > It looks like pg_ctl looks through the process list for the Postgres
> > process
> > > and then tries to kill it.  You can specify the shutdown as smart
(which
> > > translates to kill -TERM), fast (kill -INT) or immediate (kill -QUIT).
> > >
> > > When the script hits the kill, I get Usage info on the screen!!  So,
the
> > > interpreter is not seeing this as a valid command line string for
kill.
> I
> > > have echoed the command being generated out and it looks fine.  I can
> take
> > > that same command and execute it: it shuts Postgres down.
> > >
> > > Why would the interpreter rejecting the command line for kill when it
> > > appears to be well formed?
> > >
> > > Any help would be greatly appreciated.
> >
> > You probably have another "kill" in the path before "/bin/kill".  Try
> > "bash -c 'exec -l sh'", and from there "which kill".
> >
> > Had you attached the output of "cygcheck -svr", as requested in the
> > problem reporting guidelines at <http://cygwin.com/problems.html>, it
> > would have provided some information for a more intelligent guess.
> >         Igor
>
> --
>                                 http://cs.nyu.edu/~pechtcha/
>       |\      _,,,---,,_                pechtcha@cs.nyu.edu
> ZZZzz /,`.-'`'    -.  ;-;;,_            igor@watson.ibm.com
>      |,4-  ) )-,_. ,\ (  `'-'           Igor Pechtchanski, Ph.D.
>     '---''(_/--'  `-'\_) fL     a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!
>
> "I have since come to realize that being between your mentor and his route
> to the bathroom is a major career booster."  -- Patrick Naughton
>
>
> --
> Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
> Problem reports:       http://cygwin.com/problems.html
> Documentation:         http://cygwin.com/docs.html
> FAQ:                   http://cygwin.com/faq/
>

--
				http://cs.nyu.edu/~pechtcha/
      |\      _,,,---,,_		pechtcha@cs.nyu.edu
ZZZzz /,`.-'`'    -.  ;-;;,_		igor@watson.ibm.com
     |,4-  ) )-,_. ,\ (  `'-'		Igor Pechtchanski, Ph.D.
    '---''(_/--'  `-'\_) fL	a.k.a JaguaR-R-R-r-r-r-.-.-.  Meow!

"I have since come to realize that being between your mentor and his route
to the bathroom is a major career booster."  -- Patrick Naughton


--
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple
Problem reports:       http://cygwin.com/problems.html
Documentation:         http://cygwin.com/docs.html
FAQ:                   http://cygwin.com/faq/


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]