This is the mail archive of the cygwin mailing list for the Cygwin project.


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]
Other format: [Raw text]

Aw: Problem with stunnel/rsync & tcp_wrappers under cygwin


after a lot of digging into it, i found it must be a problem related to pthreads.

when i compile stunnel with --with-threads=fork  , it works.

2014.02.27 14:19:21 LOG5[5500:0]: stunnel 4.56 on x86_64-unknown-cygwin platform
2014.02.27 14:19:21 LOG5[5500:0]: Compiled/running with OpenSSL 1.0.1e 11 Feb 2013
2014.02.27 14:19:21 LOG5[5500:0]: Threading:FORK Sockets:POLL,IPv6 SSL:ENGINE,OCSP Auth:LIBWRAP
2014.02.27 14:19:21 LOG5[5500:0]: Reading configuration from file /etc/stunnel/stunnel.conf
2014.02.27 14:19:21 LOG7[5500:0]: Compression not enabled
2014.02.27 14:19:21 LOG7[5500:0]: PRNG seeded successfully
2014.02.27 14:19:21 LOG6[5500:0]: Initializing service [rsync]
2014.02.27 14:19:21 LOG4[5500:0]: Insecure file permissions on /etc/stunnel/stunnel.pem
2014.02.27 14:19:21 LOG7[5500:0]: Certificate: /etc/stunnel/stunnel.pem
2014.02.27 14:19:21 LOG7[5500:0]: Certificate loaded
2014.02.27 14:19:21 LOG7[5500:0]: Key file: /etc/stunnel/stunnel.pem
2014.02.27 14:19:21 LOG7[5500:0]: Private key loaded
2014.02.27 14:19:21 LOG7[5500:0]: Using DH parameters from /etc/stunnel/stunnel.pem
2014.02.27 14:19:21 LOG7[5500:0]: DH initialized with 1024-bit key
2014.02.27 14:19:21 LOG7[5500:0]: ECDH initialized with curve prime256v1
2014.02.27 14:19:21 LOG7[5500:0]: SSL options set: 0x00000004
2014.02.27 14:19:21 LOG5[5500:0]: Configuration successful
2014.02.27 14:19:21 LOG7[5500:0]: Service [rsync] (FD=6) bound to 0.0.0.0:1873
2014.02.27 14:19:21 LOG7[5500:0]: Created pid file /var/run/stunnel.pid
2014.02.27 14:19:36 LOG7[5500:0]: Service [rsync] accepted (FD=3) from 192.168.0.116:60289
2014.02.27 14:19:36 LOG7[14636:0]: Service [rsync] started
2014.02.27 14:19:36 LOG7[14636:0]: Service [rsync] permitted by libwrap from 192.168.0.116:60289
2014.02.27 14:19:36 LOG5[14636:0]: Service [rsync] accepted connection from 192.168.0.116:60289
2014.02.27 14:19:36 LOG7[14636:0]: SSL state (accept): before/accept initialization
2014.02.27 14:19:36 LOG7[14636:0]: SNI: no virtual services defined
--snip--

>
> Hi,
> i have a strange problem with tcp_wrappers in conjunction with stunnel cygwin port. (cc`ing stunnel cygwin maintainer because of that).
> 
> I`m trying to secure an rsync which is started in daemon-mode in an inetd-style via stunnel. I`m on Win8 64Bit with a recent 64bit Cygwin installation.
> 
> When i put rsync: ALL in "/etc/hosts.allow" all is fine, but when i try to restrict connection to a single IP-Adress it doesn`t work. I spent some time on this but i don`t get this working.
> 
> See the log snippets below this mail.
> 
> successful connection looks like this:
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: Released libwrap process #0
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: Service [rsync] permitted by libwrap from 192.168.0.116:60222
> 2014.02.23 12:36:22 LOG5[16424:25770120176]: Service [rsync] accepted connection from 192.168.0.116:60222
> 
> unsuccessful connection looks like this:
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: Released libwrap process #0
> 2014.02.23 12:34:34 LOG4[17800:25770120176]: Service [rsync] REFUSED by libwrap from 192.168.0.116:60221
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: See hosts_access(5) manual for details
> 
> Afaik, tcpwrappers only checks for IP-address , not source port - correct ?
> 
> I`m curious about IP:PORT in the logs. 
> 
> I`m no programmer, but if i get this right, the "accepted_address" is being passed to libwrap to be checked for authentication and libwrap tells if connection is permitted or not.  So, i`m curious why "accepted_address" seems to contain IP:PORT where it should possibly only contain "IP".
> 
> from the stunnel sources:
> 
> client.c 
> ---snipp---
> /* authenticate based on retrieved IP address of the client */
> accepted_address=s_ntop(&c->peer_addr, c->peer_addr_len);
> #ifdef USE_LIBWRAP
> libwrap_auth(c, accepted_address);
> #endif /* USE_LIBWRAP */
> auth_user(c, accepted_address);
> s_log(LOG_NOTICE, "Service [%s] accepted connection from %s",
> c->opt->servname, accepted_address);
> str_free(accepted_address);
> }
> 
> ---snipp---
> 
> libwrap.c 
> ---snipp---
> #endif /* USE_PTHREAD */
>     { /* use original, synchronous libwrap calls */
>         enter_critical_section(CRIT_LIBWRAP);
>         result=check(c->opt->servname, c->local_rfd.fd);
>         leave_critical_section(CRIT_LIBWRAP);
>     }
>     if(!result) {
>         s_log(LOG_WARNING, "Service [%s] REFUSED by libwrap from %s",
>             c->opt->servname, accepted_address);
>         s_log(LOG_DEBUG, "See hosts_access(5) manual for details");
>         longjmp(c->err, 1);
>     }
>     s_log(LOG_DEBUG, "Service [%s] permitted by libwrap from %s",
>         c->opt->servname, accepted_address);
> }
> 
> ---snipp---
> 
> Bug ?
> 
> I`m out of ideas otherwise...
> 
> regards
> Roland
> 
> 
> 
> 
> stunnel.exe info:
> 
> 2014.02.23 12:36:16 LOG7[16424:25769803872]: Clients allowed=125
> 2014.02.23 12:36:16 LOG5[16424:25769803872]: stunnel 4.56 on x86_64-unknown-cygwin platform
> 2014.02.23 12:36:16 LOG5[16424:25769803872]: Compiled/running with OpenSSL 1.0.1e 11 Feb 2013
> 2014.02.23 12:36:16 LOG5[16424:25769803872]: Threading:PTHREAD Sockets:POLL,IPv6 SSL:ENGINE,OCSP Auth:LIBWRAP
> 2014.02.23 12:36:16 LOG5[16424:25769803872]: Reading configuration from file /etc/stunnel/stunnel.conf
> 
> 
> This one works:
> 
> $ cat /etc/hosts.allow
> rsync: ALL
> 
> stunnel log:
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: Acquired libwrap process #0
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: Releasing libwrap process #0
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: Released libwrap process #0
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: Service [rsync] permitted by libwrap from 192.168.0.116:60222
> 2014.02.23 12:36:22 LOG5[16424:25770120176]: Service [rsync] accepted connection from 192.168.0.116:60222
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: SSL state (accept): before/accept initialization
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: SNI: no virtual services defined
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: SSL state (accept): SSLv3 read client hello A
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: SSL state (accept): SSLv3 write server hello A
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: SSL state (accept): SSLv3 write certificate A
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: SSL state (accept): SSLv3 write key exchange A
> 2014.02.23 12:36:22 LOG7[16424:25770120176]: SSL state (accept): SSLv3 write certificate request A
> 
> 
> All of the following ones do NOT work
> 
> $ cat /etc/hosts.allow
> rsync: 192.168.0.116
> 
> 2014.02.23 11:48:01 LOG5[17800:25769803872]: Configuration successful
> 2014.02.23 11:48:01 LOG7[17800:25769803872]: Service [rsync] (FD=11) bound to 0.0.0.0:1873
> 2014.02.23 11:48:01 LOG7[17800:25769803872]: Created pid file /var/run/stunnel.pid
> 2014.02.23 12:34:34 LOG7[17800:25769803872]: Service [rsync] accepted (FD=3) from 192.168.0.116:60221
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: Service [rsync] started
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: Waiting for a libwrap process
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: Acquired libwrap process #0
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: Releasing libwrap process #0
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: Released libwrap process #0
> 2014.02.23 12:34:34 LOG4[17800:25770120176]: Service [rsync] REFUSED by libwrap from 192.168.0.116:60221
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: See hosts_access(5) manual for details
> 2014.02.23 12:34:34 LOG5[17800:25770120176]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: Local socket (FD=3) closed
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: Service [rsync] finished (0 left)
> 2014.02.23 12:34:34 LOG7[17800:25770120176]: str_stats: 1 block(s), 32 data byte(s), 58 control byte(s)
> 2014.02.23 12:36:15 LOG7[17800:25769803872]: Dispatching signals from the signal pipe
> 
> 
> $ cat /etc/hosts.allow
> rsync: 192.168.0.116 : allow
> 
> 2014.02.23 12:44:36 LOG7[5248:25770120176]: Waiting for a libwrap process
> 2014.02.23 12:44:36 LOG7[5248:25770120176]: Acquired libwrap process #0
> 2014.02.23 12:44:36 LOG7[5248:25770120176]: Releasing libwrap process #0
> 2014.02.23 12:44:36 LOG7[5248:25770120176]: Released libwrap process #0
> 2014.02.23 12:44:36 LOG4[5248:25770120176]: Service [rsync] REFUSED by libwrap from 192.168.0.116:60223
> 2014.02.23 12:44:36 LOG7[5248:25770120176]: See hosts_access(5) manual for details
> 2014.02.23 12:44:36 LOG5[5248:25770120176]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
> 2014.02.23 12:44:36 LOG7[5248:25770120176]: Local socket (FD=3) closed
> 2014.02.23 12:44:36 LOG7[5248:25770120176]: Service [rsync] finished (0 left)
> 2014.02.23 12:44:36 LOG7[5248:25770120176]: str_stats: 1 block(s), 32 data byte(s), 58 control byte(s)
> 
> $ cat /etc/hosts.allow
> rsync: 192.168.0.116/32 : allow
> 
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: Service [rsync] started
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: Waiting for a libwrap process
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: Acquired libwrap process #0
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: Releasing libwrap process #0
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: Released libwrap process #0
> 2014.02.23 12:46:02 LOG4[10392:25770120176]: Service [rsync] REFUSED by libwrap from 192.168.0.116:60224
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: See hosts_access(5) manual for details
> 2014.02.23 12:46:02 LOG5[10392:25770120176]: Connection reset: 0 byte(s) sent to SSL, 0 byte(s) sent to socket
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: Local socket (FD=3) closed
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: Service [rsync] finished (0 left)
> 2014.02.23 12:46:02 LOG7[10392:25770120176]: str_stats: 1 block(s), 32 data byte(s), 58 control byte(s)
> 
> 
> 
> 
> $ cat /etc/stunnel/stunnel.conf
> client = no
> foreground = yes
> 
> #setuid = root
> #setgid = root
> #
> pid = /var/run/stunnel.pid
> 
> debug = 7
> output = /var/log/stunnel.log
> 
> socket = l:TCP_NODELAY=1
> socket = r:TCP_NODELAY=1
> 
> socket = l:SO_LINGER=1:60
> 
> 
> [rsync]
> accept = 1873
> cert = /etc/stunnel/stunnel.pem
> client = no
> verify = 0
> libwrap = yes
> exec = /usr/bin/rsync
> execargs = rsync --daemon --config /etc/rsync-ssl/rsync-ssl.conf

--
Problem reports:       http://cygwin.com/problems.html
FAQ:                   http://cygwin.com/faq/
Documentation:         http://cygwin.com/docs.html
Unsubscribe info:      http://cygwin.com/ml/#unsubscribe-simple


Index Nav: [Date Index] [Subject Index] [Author Index] [Thread Index]
Message Nav: [Date Prev] [Date Next] [Thread Prev] [Thread Next]