This is the mail archive of the
mailing list for the Cygwin project.
[ANNOUNCEMENT] Updated: OpenSSH-7.5p1-1
- From: Corinna Vinschen <corinna-cygwin at cygwin dot com>
- To: cygwin at cygwin dot com
- Date: Mon, 20 Mar 2017 16:49:38 +0100
- Subject: [ANNOUNCEMENT] Updated: OpenSSH-7.5p1-1
- Authentication-results: sourceware.org; auth=none
- Authentication-results: sourceware.org; auth=none
- Reply-to: cygwin at cygwin dot com
I've just updated the Cygwin version of OpenSSH to 7.5p1-1.
This is primarily an upstream bugfix release.
Below's the original release message.
OpenSSH 7.5 has just been released. It will be available from the
mirrors listed at http://www.openssh.com/ shortly.
OpenSSH is a 100% complete SSH protocol 2.0 implementation and
includes sftp client and server support. OpenSSH also includes
transitional support for the legacy SSH 1.3 and 1.5 protocols
that may be enabled at compile-time.
Once again, we would like to thank the OpenSSH community for their
continued support of the project, especially those who contributed
code or patches, reported bugs, tested snapshots or donated to the
project. More information on donations may be found at:
Future deprecation notice
We plan on retiring more legacy cryptography in future releases,
* In the next major release (expected June-August), removing remaining
support for the SSH v.1 protocol (currently client-only and compile-
* In the same release, removing support for Blowfish and RC4 ciphers
and the RIPE-MD160 HMAC. (These are currently run-time disabled).
* In the same release, removing the remaining CBC ciphers from being
offered by default in the client (These have not been offered in
sshd by default for several years).
* Refusing all RSA keys smaller than 1024 bits (the current minimum
is 768 bits)
This list reflects our current intentions, but please check the final
release notes for future releases.
This release includes a number of changes that may affect existing
* This release deprecates the sshd_config UsePrivilegeSeparation
option, thereby making privilege separation mandatory. Privilege
separation has been on by default for almost 15 years and
sandboxing has been on by default for almost the last five.
* The format of several log messages emitted by the packet code has
changed to include additional information about the user and
their authentication state. Software that monitors ssh/sshd logs
may need to account for these changes. For example:
Connection closed by user x 18.104.22.168 port 1234 [preauth]
Connection closed by authenticating user x 10.1.1.1 port 1234 [preauth]
Connection closed by invalid user x 22.214.171.124 port 1234 [preauth]
Affected messages include connection closure, timeout, remote
disconnection, negotiation failure and some other fatal messages
generated by the packet code.
* [Portable OpenSSH only] This version removes support for building
against OpenSSL versions prior to 1.0.1. OpenSSL stopped supporting
versions prior to 1.0.1 over 12 months ago (i.e. they no longer
receive fixes for security bugs).
Changes since OpenSSH 7.4
This is a bugfix release.
* ssh(1), sshd(8): Fix weakness in CBC padding oracle countermeasures
that allowed a variant of the attack fixed in OpenSSH 7.3 to proceed.
Note that the OpenSSH client disables CBC ciphers by default, sshd
offers them as lowest-preference options and will remove them by
default entriely in the next release. Reported by Jean Paul
Degabriele, Kenny Paterson, Martin Albrecht and Torben Hansen of
Royal Holloway, University of London.
* sftp-client(1): [portable OpenSSH only] On Cygwin, a client making
a recursive file transfer could be maniuplated by a hostile server to
perform a path-traversal attack. creating or modifying files outside
of the intended target directory. Reported by Jann Horn of Google
* ssh(1), sshd(8): Support "=-" syntax to easily remove methods from
algorithm lists, e.g. Ciphers=-*cbc. bz#2671
* sshd(1): Fix NULL dereference crash when key exchange start
messages are sent out of sequence.
* ssh(1), sshd(8): Allow form-feed characters to appear in
* sshd(8): Fix regression in OpenSSH 7.4 support for the
server-sig-algs extension, where SHA2 RSA signature methods were
not being correctly advertised. bz#2680
* ssh(1), ssh-keygen(1): Fix a number of case-sensitivity bugs in
known_hosts processing. bz#2591 bz#2685
* ssh(1): Allow ssh to use certificates accompanied by a private key
file but no corresponding plain *.pub public key. bz#2617
* ssh(1): When updating hostkeys using the UpdateHostKeys option,
accept RSA keys if HostkeyAlgorithms contains any RSA keytype.
Previously, ssh could ignore RSA keys when only the ssh-rsa-sha2-*
methods were enabled in HostkeyAlgorithms and not the old ssh-rsa
* ssh(1): Detect and report excessively long configuration file
* Merge a number of fixes found by Coverity and reported via Redhat
and FreeBSD. Includes fixes for some memory and file descriptor
leaks in error paths. bz#2687
* ssh-keyscan(1): Correctly hash hosts with a port number. bz#2692
* ssh(1), sshd(8): When logging long messages to stderr, don't truncate
"\r\n" if the length of the message exceeds the buffer. bz#2688
* ssh(1): Fully quote [host]:port in generated ProxyJump/-J command-
line; avoid confusion over IPv6 addresses and shells that treat
square bracket characters specially.
* ssh-keygen(1): Fix corruption of known_hosts when running
"ssh-keygen -H" on a known_hosts containing already-hashed entries.
* Fix various fallout and sharp edges caused by removing SSH protocol
1 support from the server, including the server banner string being
incorrectly terminated with only \n (instead of \r\n), confusing
error messages from ssh-keyscan bz#2583 and a segfault in sshd
if protocol v.1 was enabled for the client and sshd_config
contained references to legacy keys bz#2686.
* ssh(1), sshd(8): Free fd_set on connection timeout. bz#2683
* sshd(8): Fix Unix domain socket forwarding for root (regression in
* sftp(1): Fix division by zero crash in "df" output when server
returns zero total filesystem blocks/inodes.
* ssh(1), ssh-add(1), ssh-keygen(1), sshd(8): Translate OpenSSL errors
encountered during key loading to more meaningful error codes.
* ssh-keygen(1): Sanitise escape sequences in key comments sent to
printf but preserve valid UTF-8 when the locale supports it;
* ssh(1), sshd(8): Return reason for port forwarding failures where
feasible rather than always "administratively prohibited". bz#2674
* sshd(8): Fix deadlock when AuthorizedKeysCommand or
AuthorizedPrincipalsCommand produces a lot of output and a key is
matched early. bz#2655
* Regression tests: several reliability fixes. bz#2654 bz#2658 bz#2659
* ssh(1): Fix typo in ~C error message for bad port forward
* ssh(1): Show a useful error message when included config files
can't be opened; bz#2653
* sshd(8): Make sshd set GSSAPIStrictAcceptorCheck=yes as the manual page
(previously incorrectly) advertised. bz#2637
* sshd_config(5): Repair accidentally-deleted mention of %k token
in AuthorizedKeysCommand; bz#2656
* sshd(8): Remove vestiges of previously removed LOGIN_PROGRAM; bz#2665
* ssh-agent(1): Relax PKCS#11 whitelist to include libexec and
common 32-bit compatibility library directories.
* sftp-client(1): Fix non-exploitable integer overflow in SSH2_FXP_NAME
* ssh-agent(1): Fix regression in 7.4 of deleting PKCS#11-hosted
keys. It was not possible to delete them except by specifying
their full physical path. bz#2682
* sshd(8): Avoid sandbox errors for Linux S390 systems using an ICA
* sshd(8): Fix non-exploitable weakness in seccomp-bpf sandbox arg
* ssh(1): Fix X11 forwarding on OSX where X11 was being started by
* ssh-keygen(1), ssh(1), sftp(1): Fix output truncation for various that
contain non-printable characters where the codeset in use is ASCII.
* build: Fix builds that attempt to link a kerberised libldns. bz#2603
* build: Fix compilation problems caused by unconditionally defining
_XOPEN_SOURCE in wide character detection.
* sshd(8): Fix sandbox violations for clock_gettime VSDO syscall
fallback on some Linux/X32 kernels. bz#2142
- SHA1 (openssh-7.5.tar.gz) = 81384df377e38551f7659a4c250383d0bbd25341
- SHA1 (openssh-7.5p1.tar.gz) = 5e8f185d00afb4f4f89801e9b0f8b9cee9d87ebd
- SHA256 (openssh-7.5.tar.gz) = Gmk8jOdGdKa7NixUN5J+bTMfeum5Vx8Nv+leAdQNq3U=
- SHA256 (openssh-7.5p1.tar.gz) = mEbjxfq58FR0ALTSwBeZL5FCIrP9H47ubH3GvF5Z+fA=
Please note that the SHA256 signatures are base64 encoded and not
hexadecimal (which is the default for most checksum tools). The PGP
key used to sign the releases is available as RELEASE_KEY.asc from
the mirror sites.
- Please read http://www.openssh.com/report.html
Security bugs should be reported directly to email@example.com
OpenSSH is brought to you by Markus Friedl, Niels Provos, Theo de
Raadt, Kevin Steves, Damien Miller, Darren Tucker, Jason McIntyre,
Tim Rice and Ben Lindstrom.
Corinna Vinschen Please, send mails regarding Cygwin to
Cygwin Project Co-Leader cygwin AT cygwin DOT com
Problem reports: http://cygwin.com/problems.html
Unsubscribe info: http://cygwin.com/ml/#unsubscribe-simple